GROUP PURCHASE- Sun Guns Projector Lighting System- From JWM
05-18-2011, 03:23 PM
#21
Banned Scam/Spammer
Thread Starter
Member Since: Feb 2007
Location: Oklahoma City
Posts: 50,094
Received 265 Likes
on
253 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'19,'22
4 so far in including myself. To those that pm'd me I got them and will be replying back soon. I've been crazy busy today!
05-18-2011, 03:29 PM
#22
Banned Scam/Spammer
Thread Starter
Member Since: Feb 2007
Location: Oklahoma City
Posts: 50,094
Received 265 Likes
on
253 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'19,'22
There was an interest for a shroudless GP so we decided to make it happen. I'd rather wait until the whole thing is done, but what you guys want will come first
Sorry I am not sure yet. I haven't checked out the way these will connect to the OEM plugs yet. Not sure if we could get the halogens to connect to those.
I know for the HID we use our wiring harness.
Michael?
05-18-2011, 04:03 PM
#23
CF "Young" Senior Member
Concerns regarding the shroud aside, I'm in, gonna go for the 5k's (no fogs).
If there's any other orders coming in to the bay area we can group the shipping if anyone's interested?
If there's any other orders coming in to the bay area we can group the shipping if anyone's interested?
05-18-2011, 06:51 PM
#27
Le Mans Master
Member Since: Jul 2009
Location: Los Angeles California
Posts: 9,526
Likes: 0
Received 10 Likes
on
10 Posts
HAHA! I'm here. I just PM'd you for my set. 
I just slept in like crazy today. (Woke up around 3:30p LOL)
Is that the same high bulb as we currently use? I want to know if I can use my new HIR 9011s for the high beams.
I just slept in like crazy today. (Woke up around 3:30p LOL)Is that the same high bulb as we currently use? I want to know if I can use my new HIR 9011s for the high beams.
05-18-2011, 06:58 PM
#30
Banned Scam/Spammer
Thread Starter
Member Since: Feb 2007
Location: Oklahoma City
Posts: 50,094
Received 265 Likes
on
253 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'19,'22
I don't know much about brighter H9 bulbs, but the C6 uses them for highs. A lot of those guys use whats called HOEN bulbs.
These highs pictured here are HOEN
These highs pictured here are HOEN
05-18-2011, 07:10 PM
#32
Drifting
We understand. Once everything is worked out and we have the final product we should have some sets that will go for retail.
There was an interest for a shroudless GP so we decided to make it happen. I'd rather wait until the whole thing is done, but what you guys want will come first
There was an interest for a shroudless GP so we decided to make it happen. I'd rather wait until the whole thing is done, but what you guys want will come first
Just the way we roll... 
05-19-2011, 10:06 AM
#33
Team Owner
Are the tolerances on the shroud going to be that tight? The shrouds will be built off 1 set of headlights aimed a particular way. It seems that if everyone else don't have theirs aimed pretty damn close to the original lights, then we would have trouble getting the shroud to fit properly?
05-19-2011, 10:31 AM
#34
Drifting
^^^^^^^^^
That's been a big concern from the start and something Pete and I talked extensively about.
I think the best visual example of what were striving for is the photo Patches posted in the other thread of the Pagani.
The close up shot shows the clearances around individually adjustable projectors within a fixed cf bezel.
You can even see what appears to be aiming adjustment access holes in the upper-outboard edges. Not a fan of those but functionallity wise makes sense for that application.
[/QUOTE]
Our Silver Hella bezels will stick out a lot more than these but the comparison is similar enough...
I think the best visual example of what were striving for is the photo Patches posted in the other thread of the Pagani.
The close up shot shows the clearances around individually adjustable projectors within a fixed cf bezel.
You can even see what appears to be aiming adjustment access holes in the upper-outboard edges. Not a fan of those but functionallity wise makes sense for that application.
[/QUOTE]Our Silver Hella bezels will stick out a lot more than these but the comparison is similar enough...
05-19-2011, 10:37 AM
#35
Melting Slicks
Are the tolerances on the shroud going to be that tight? The shrouds will be built off 1 set of headlights aimed a particular way. It seems that if everyone else don't have theirs aimed pretty damn close to the original lights, then we would have trouble getting the shroud to fit properly?
Last edited by c5vetteguy; 05-19-2011 at 10:41 AM.
05-19-2011, 06:54 PM
#37
Being able to see at night is more than worth the minor bug opportuniy!
05-19-2011, 07:48 PM
#39
Instructor
I’m interested in the head lights but I have several questions.
1. Do you have any pictures with the lights on shining down the road (on a wall), so I can see how well they illuminate?
2. How do you control how high the head lights open?
3. I know you say you don’t have a date or price on the shrouds/bezels, but it looks like from previous posts that the light have been around since last July and the shrouds/bezels are not available yet (big concern). What stage of production are they in?
4. What would shipping be to 08753?
Thanks.
P.S. I love the look with the partial head light opening.
1. Do you have any pictures with the lights on shining down the road (on a wall), so I can see how well they illuminate?
2. How do you control how high the head lights open?
3. I know you say you don’t have a date or price on the shrouds/bezels, but it looks like from previous posts that the light have been around since last July and the shrouds/bezels are not available yet (big concern). What stage of production are they in?
4. What would shipping be to 08753?
Thanks.
P.S. I love the look with the partial head light opening.