Let's see modified front ends!
Thread Starter
Melting Slicks
Joined: Sep 2010
Posts: 2,208
Likes: 6
From: Prince George VA
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Drifting
Joined: May 2010
Posts: 1,342
Likes: 0
From: Elizabeth City, Outer Banks NC
RK-5 hood and Wiggins Racing has been doing a lot of the work under the hood.
I posted on here I was looking for a nitrous nozzle for the purge and didn't find anything I wanted. Not a fan of those long hard looking lines and wanted something cleaner looking. Wanted the spray to fire straight up somehow in the middle of the car towards the front without drilling a huge hole in the hood. Explained this to William and he sent me the photo of it finished. Honest to god I had to call him and ask him where the "H" the nozzle was. I marked it on the last photo. I'm meticulous about things on this toy and when I ask him to make it small he really listened..
Do have the screens in and fat daddy's now from CHIP so she's coming right along.
I posted on here I was looking for a nitrous nozzle for the purge and didn't find anything I wanted. Not a fan of those long hard looking lines and wanted something cleaner looking. Wanted the spray to fire straight up somehow in the middle of the car towards the front without drilling a huge hole in the hood. Explained this to William and he sent me the photo of it finished. Honest to god I had to call him and ask him where the "H" the nozzle was. I marked it on the last photo. I'm meticulous about things on this toy and when I ask him to make it small he really listened..
Do have the screens in and fat daddy's now from CHIP so she's coming right along.
Last edited by liveaboard74; Jan 18, 2012 at 09:36 PM.
L8R ZFLASH
Race Director
Joined: Apr 2010
Posts: 16,253
Likes: 1,657
From: Arizona
This is the absolute best looking license plate cut out I have yet to see! Awesome!!! Very unique and the cut lines are superb!
Is this a do-it-yourself, or did you have a shop make those cut lines and install the mesh wiring?
I would like to follow your lead in this.
[/IMG]
Racer
Joined: Jan 2012
Posts: 306
Likes: 0
From: charlotte north carolin
