Help on MGS Short Shifter Mod
#1
Advanced
Thread Starter
Help on MGS Short Shifter Mod
Hi All:
I have a 2001 convertible and I am going to replace the OEM shifter with MGW's short shifter. In MGW's installation video they recommend replacing the OEM lower shifter box and give GM part number 2582-3572 as the correct part to use. However, when I went to order the part from one of our vendors, GMPartsDirect, they stated they could not find this part listed for my VIN number and instead recommended GM part #10331311 Manual Transmission Control as the correct part - it's also twice the price of the part number MGW lists and GMPartsDirect says if they can't confirm the part, I can't return it if it's the wrong one.
Has anyone completed this conversion using the MGW shifter and also replacing the lower shifter box (GM part number 2582-3572) that MGW recommends? Or is the other number the correct one? Which part did you use?
Thanks very much for any help; you can PM or relpy here.
Charles
I have a 2001 convertible and I am going to replace the OEM shifter with MGW's short shifter. In MGW's installation video they recommend replacing the OEM lower shifter box and give GM part number 2582-3572 as the correct part to use. However, when I went to order the part from one of our vendors, GMPartsDirect, they stated they could not find this part listed for my VIN number and instead recommended GM part #10331311 Manual Transmission Control as the correct part - it's also twice the price of the part number MGW lists and GMPartsDirect says if they can't confirm the part, I can't return it if it's the wrong one.
Has anyone completed this conversion using the MGW shifter and also replacing the lower shifter box (GM part number 2582-3572) that MGW recommends? Or is the other number the correct one? Which part did you use?
Thanks very much for any help; you can PM or relpy here.
Charles
#2
Melting Slicks
Member Since: Oct 2007
Location: Holland Landing Ontario
Posts: 2,724
Likes: 0
Received 1 Like
on
1 Post
I installed mine w/o the part you mentioned and drove it that way for 2 years. I was never really happy with the effort it took to shift to the left of right side of the pattern. I did the anti-venom mod last fall and couldn't be happier.
You can read about it here:
http://forums.corvetteforum.com/c5-g...procedure.html
You can read about it here:
http://forums.corvetteforum.com/c5-g...procedure.html
#3
Drifting
Hi,
In the MGW write up they state that the bushings and the seal are the issue, the bushings alone are sold by
Corvette Central part #535109 <10 bucks (vibration damping)
Rockauto sells the seals or 12455028 inner < 11 bucks. Really a dust seal on the shaft into the shifter box.
These are the only real wear items ...hth's
Regards Ian
In the MGW write up they state that the bushings and the seal are the issue, the bushings alone are sold by
Corvette Central part #535109 <10 bucks (vibration damping)
Rockauto sells the seals or 12455028 inner < 11 bucks. Really a dust seal on the shaft into the shifter box.
These are the only real wear items ...hth's
Regards Ian
#4
Pro
Member Since: Nov 2012
Location: Raleigh North Carolina
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
25823572
Get this one. Replaced mine when I did the MGW install. You won't have any issues. The part number they gave you was for 1997-2004 models. The part number above is for the 2005-2013 models. Literally a drop in replacement. No issues whatsoever.
Get this one. Replaced mine when I did the MGW install. You won't have any issues. The part number they gave you was for 1997-2004 models. The part number above is for the 2005-2013 models. Literally a drop in replacement. No issues whatsoever.
#5
Burning Brakes
I installed the MGW shifter on my 2000, and ordered the shift box with the part number they gave from GMpartswharehouse. I didn't have any issues at all...
Thought the shifter box I recieved had the C6 style shifter on it. Wasn't a big deal since the lower box is the exact same and I wasnt going to use that shifter anyway.
Thought the shifter box I recieved had the C6 style shifter on it. Wasn't a big deal since the lower box is the exact same and I wasnt going to use that shifter anyway.
Last edited by crazystevex; 03-07-2013 at 05:18 AM.