Vettenuts double din center console
01-20-2017, 11:57 AM
#81
We have got the texture process down after making mistakes on our early production units. We have some exciting news to share with the CF Community!
After hand making the bezels for over 6 months we decided to send them out to be molded just like the way they should have come from GM! These will be brand new bezels with texture stamped in like GM did on the originals. The fit and finish will be far better than the hand made conversion process. VetteNuts had to spend a significant amount of capitol to get the bezels into production, we will be receiving our first sample run in the next 7-14 days. Once we approve the first run we will have them in stock for shipping within 60 days.
We will be doing a Group Buy as soon as we approve the first run. We will then list them for sale at a one time sale price that will never, and i mean never seen again! We are doing this to help recover a portion of our operating capitol. Stay tuned for more detail to follow.
We are relasing several new VetteNuts products in the next few months.
]
After hand making the bezels for over 6 months we decided to send them out to be molded just like the way they should have come from GM! These will be brand new bezels with texture stamped in like GM did on the originals. The fit and finish will be far better than the hand made conversion process. VetteNuts had to spend a significant amount of capitol to get the bezels into production, we will be receiving our first sample run in the next 7-14 days. Once we approve the first run we will have them in stock for shipping within 60 days.
We will be doing a Group Buy as soon as we approve the first run. We will then list them for sale at a one time sale price that will never, and i mean never seen again! We are doing this to help recover a portion of our operating capitol. Stay tuned for more detail to follow.
We are relasing several new VetteNuts products in the next few months.
]Last edited by phloozy; 01-28-2017 at 09:59 AM.
01-20-2017, 03:19 PM
#82
Supporting Vendor
Member Since: May 2010
Location: Bell Buckle, TN
Posts: 6,811
Received 232 Likes
on
134 Posts
St. Jude Donor '11
Yes they will feel just like oem. The problem doing them by hand is the grain texture has to be sprayed on. When the molds are made the grain is stamped into the mold so all you have to do is spray the black onto the bezel and its a perfect smooth feel with the grain already in it. The exact same process that was used to make your OEM bezel is how we are having our Double Din Bezels produced.
01-20-2017, 03:30 PM
#83
Yes they will feel just like oem. The problem doing them by hand is the grain texture has to be sprayed on. When the molds are made the grain is stamped into the mold so all you have to do is spray the black onto the bezel and its a perfect smooth feel with the grain already in it. The exact same process that was used to make your OEM bezel is how we are having our Double Din Bezels produced.
01-20-2017, 03:40 PM
#84
Melting Slicks
We have got the texture process down after making mistakes on our early production units. We have some exciting news to share with the CF Community!
After hand making the bezels for over 6 months we decided to send them out to be molded just like the way they should have come from GM! These will be brand new bezels with texture stamped in like GM did on the originals. The fit and finish will be far better than the hand made conversion process. VetteNuts had to spend a significant amount of capitol to get the bezels into production, we will be receiving our first sample run in the next 7-14 days. Once we approve the first run we will have them in stock for shipping within 60 days.
We will be doing a Group Buy as soon as we approve the first run. We will then list them for sale at a one time sale price that will never, and i mean never seen again! We are doing this to help recover a portion of our operating capitol. Stay tuned for more detail to follow.
We are relasing several new VetteNuts products in the next few months. ]
After hand making the bezels for over 6 months we decided to send them out to be molded just like the way they should have come from GM! These will be brand new bezels with texture stamped in like GM did on the originals. The fit and finish will be far better than the hand made conversion process. VetteNuts had to spend a significant amount of capitol to get the bezels into production, we will be receiving our first sample run in the next 7-14 days. Once we approve the first run we will have them in stock for shipping within 60 days.
We will be doing a Group Buy as soon as we approve the first run. We will then list them for sale at a one time sale price that will never, and i mean never seen again! We are doing this to help recover a portion of our operating capitol. Stay tuned for more detail to follow.
We are relasing several new VetteNuts products in the next few months.
]
01-20-2017, 03:45 PM
#85
Safety Car
Member Since: Apr 2013
Location: Oregon
Posts: 4,617
Received 971 Likes
on
783 Posts
St. Jude Donor '14-'15-'16-'17-'18-'19-'20-'21-'22-'23
Yes they will feel just like oem. The problem doing them by hand is the grain texture has to be sprayed on. When the molds are made the grain is stamped into the mold so all you have to do is spray the black onto the bezel and its a perfect smooth feel with the grain already in it. The exact same process that was used to make your OEM bezel is how we are having our Double Din Bezels produced.
Last edited by Smoken1; 01-20-2017 at 03:46 PM.
01-21-2017, 04:15 PM
#87
Miles of Smiles
Member Since: Mar 2010
Location: Omaha Nebraska
Posts: 3,181
Received 540 Likes
on
365 Posts
2016 C5 of the Year Finalist
Will be interesting to see Marc's new versions, and hear how they look/feel in the real world. Kudos to continuous improvement on your products!!
Watching thread to see what the introductory price will be. 
08-23-2017, 12:25 AM
#93
Burning Brakes
Purchased!
I laid my money down! Now the wait and I certainly hope it's worth it because I bought the metra double din and just couldn't install it and sent it back. The surface was too smooth and I felt that if it was scratched it wouldn't be as forgiving as the molded finish. Just my opinion.
Looks like we'll be seeing them sometime in late September, is that right Marc? Please update us if you can.
Looks like we'll be seeing them sometime in late September, is that right Marc? Please update us if you can.