New Wheels installed along with a Corsa Cat Back
#1
Safety Car
Thread Starter
New Wheels installed along with a Corsa Cat Back
Got around to doing 1/2 of my 2017 mods on my bone stock 04.
Last night at work I installed the Corsa Sport cat back along with the Corsa X-Pipe. Loving the sound ! Along with that I also purchased C6 OEM Chrome wheels, new Schrader TPM's and new Continental Extreme Contact DWS06 tires.
The aftermarket C6 style 5 spokes in a C5 Z06 size that I had on the car were horribly pitting inside the barrels.......they had to go.
Also while everything was apart I cleaned and re sprayed the rotor hats with VHT Caliper paint.
Getting Started..........
Rotors painted...
Adapters.....
Old Mufflers out.......
20mm adapters painted to match rotor hats, factory studs trimmed, a little Loctie Blue added to each stud and lug nuts torqued to 120 foot pounds.
Corsa installed along with new wheels and tires, all buttoned up and back on the ground.
I like the look with the 20mm adapters....
This round done. Next up...Already have new OEM weather stripping for the B piller and both doors. just waiting for nice weather to tackle the job...
Last night at work I installed the Corsa Sport cat back along with the Corsa X-Pipe. Loving the sound ! Along with that I also purchased C6 OEM Chrome wheels, new Schrader TPM's and new Continental Extreme Contact DWS06 tires.
The aftermarket C6 style 5 spokes in a C5 Z06 size that I had on the car were horribly pitting inside the barrels.......they had to go.
Also while everything was apart I cleaned and re sprayed the rotor hats with VHT Caliper paint.
Getting Started..........
Rotors painted...
Adapters.....
Old Mufflers out.......
20mm adapters painted to match rotor hats, factory studs trimmed, a little Loctie Blue added to each stud and lug nuts torqued to 120 foot pounds.
Corsa installed along with new wheels and tires, all buttoned up and back on the ground.
I like the look with the 20mm adapters....
This round done. Next up...Already have new OEM weather stripping for the B piller and both doors. just waiting for nice weather to tackle the job...
Last edited by SG Lou; 01-31-2018 at 01:41 PM.
#3
Looking good.
Well done, and with safety in mind too.
Well done, and with safety in mind too.
#4
Safety Car
Thread Starter
Last edited by SG Lou; 04-09-2017 at 05:58 PM.
#10
NCM Lifetime Member
Member Since: Aug 2015
Location: Cunningham, TN
Posts: 4,970
Received 3,929 Likes
on
2,014 Posts
2021 Corvette of the Year - Modified
2020 C5 of the Year Winner- Modified
C5 of Year Finalist (appearance mods) 2019
St. Jude Donor '18-'19-'20-'21-'22-'23-'24
Wait, wait, wait a minute! Did you say "last night at work" you did this?
Hey Lou, got any openings? lol
Nice work, she looks good and I'm sure she sounds much better.
Hey Lou, got any openings? lol
Nice work, she looks good and I'm sure she sounds much better.
#11
Team Owner
Member Since: Sep 2002
Location: Bonita Springs, Florida
Posts: 21,886
Received 3,054 Likes
on
2,030 Posts
Nice improvements to your car. The rotor hats really look great and a nice visual with the red calipers and new chrome rims. Big improvement in appearance with the Corsa tips and much better sound over stock. Nicely done.
#12
Team Owner
Member Since: Sep 2002
Location: Bonita Springs, Florida
Posts: 21,886
Received 3,054 Likes
on
2,030 Posts
Need some shots from the rear to see the new look.
#14
Safety Car
Thread Starter
#15
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,923
Received 19,291 Likes
on
13,965 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Lou - the car looks fantastic. The mods you have done so far really do a lot for the car.
The following 2 users liked this post by SG Lou:
Jeff T. (04-10-2017),
lewislgZ06 (04-10-2017)