When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Exersized my 3500 lbs quick jack set to get the car up to soak the pan with soap and water and then pressure wash it. Hunting a slight oil leak. Then come the rains so back in the garage fastly.
Did this over a couple days when I had time...waxed car, treated the weather strip with 303 rubber seal protectant, conditioned leather seats, replaced original fuel filter, replaced diff fluid with redline, fixed crunching sound at right read axel, changed the fan setting a bit lower then i had them originally, changed tire size with hp tuners since I bought new tires...did a couple of scans while cruising around..
Fall all the way to the bottom? I think I heard of some guys having luck fishing them back out with a pen magnet through the valley cover. Hope you get it sorted with ease.
I started replacing my radio today, so I removed the center console and removed an old aftermarket (Alpine) 1 din radio that the previous owner put in. No problems there but as I started connecting the GM harness to the new head unit harness, using the new solder heat shrink butt type wire connector sleeves with my HF heat gun, the heat gun blew (and was flaming inside) after only 4 wires were connected.
Bummer, now I have to wait on a new heat gun to be delivered Tuesday from Amazon (no stores near me).
Saw RadioFlyer was having a sale so ordered the LED fog lights for it. Can't wait to get those installed. Also got back from vaca last night so I plugged it back into the charger this morning since it's been without for 12 days.
09-22-2018, 06:30 PM
FYRARMS, your Z06 looks awesome!
