When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have searched but have not been able to find it. Does anyone know the part number for the udders on the driver's side? I took off the access panels and cleaned them but found I am missing one of the three on the drivers side. It probability won'the make any difference but I like my cars to be complete and not missing any parts.
Why not the PN of the one you need instead of the udder one? Sorry, corny... Need some humor in my day.
I'd contact Cultrag if you don't get help here.
I didn't even know these existed until a year ago when I was down there removing the pcm. Needless to say they had never been cleaned before and were full of gunk. Kind of an odd idea those crazy gm engineers came up with.
I went in there today to get up close and personal with my udders, and I could only find/feel two of them also. Is the third one in a different area, or am I missing one also?
It seems like having one missing shouldn't hurt anything, as it wouldn't get blocked with debris and cause problems--it would just dump the debris down in the engine compartment, correct?
I went in there today to get up close and personal with my udders, and I could only find/feel two of them also. Is the third one in a different area, or am I missing one also?
It seems like having one missing shouldn't hurt anything, as it wouldn't get blocked with debris and cause problems--it would just dump the debris down in the engine compartment, correct?
It would be located right next to the other two on the driver's side. You should be able to see the hole where it goes.
I don't think it makes a difference if its there or not. I decided not to worry about mine.