When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Who makes the best fitting hash marks? I've really wanted to try this for a while and tried a set from a vendor, they weren't even close to fitting. I tossed them because I didn't want to have to cut them to get them to fit and I wasn't sure it was even possible. Does anyone sell a good fitting set?
have you used these? Did they line up well? Looks like theirs are meant to be cut to fit?
Yes, I have used this company as have countless others on this site. I bought the RF style kit that has a second color border. In fact pics of mine are on the site...metallic blue with gunmetal border. They are pre-measured and cut when you receive them. Just peel and apply. Instructions were included along with measurements to get placement and spacing correct.
I make my own. I prefer the c6 style GS with whatever variation interests me at the time. The key to a good fit along the crease along the wheel well is knifeless tape, for me it's the best way to get the contour correct. If you are tucking under the fender then that is moot.
Vettestripes has the biggest following and I understand he is very accommodating for special requests.
Yes, I have used this company as have countless others on this site. I bought the RF style kit that has a second color border. In fact pics of mine are on the site...metallic blue with gunmetal border. They are pre-measured and cut when you receive them. Just peel and apply. Instructions were included along with measurements to get placement and spacing correct.
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Originally Posted by 001pewter
I think vetteman jack has a detailed pic with measurements.
Yes I do have a pic with the measurements I used when I installed the hashmarks on my '00. I can post up a pic later.
I had a local shop make my hashmarks from some commercial grade vinyl in the width I wanted and they installed them for me. The shop was Auto Trim Design and I know they have locations in other cities.
Vettestripes.com does sell quality stripe kits - I had a set of hashmarks from them at one time.
Last edited by Vetteman Jack; 08-14-2017 at 12:41 AM.
Reason: Pic added.
Yes I do have a pic with the measurements I used when I installed the hashmarks on my '00. I can post up a pic later.
I had a local shop make my hashmarks from some commercial grade vinyl in the width I wanted and they installed them for me. The shop was Auto Trim Design and I know they have locations in other cities.
Vettestripes.com does sell quality stripe kits - I had a set of hashmarks from them at one time.
Oh ok. I used the dimensions, I think it was from a old thead, to plasti dip mine.
I make my own. I prefer the c6 style GS with whatever variation interests me at the time. The key to a good fit along the crease along the wheel well is knifeless tape, for me it's the best way to get the contour correct. If you are tucking under the fender then that is moot.
Vettestripes has the biggest following and I understand he is very accommodating for special requests.
It's a colorshift vinyl, dark stripe is metallic.
I really like those C7 Z06 rims on your car chasboy! Nice!
08-12-2017, 10:05 PM
Hash marks
