Corvette taillights on Travel Trailer
#21
Drifting
Good luck. Hopefully this works out for a few of you. But I question the value. $72 for the lights and that's before any wiring or anything extra you might need to make it work. When it's only $200-$300 for a plug and play set, I'm not sure it's worth the time and money for something that won't be perfect.
Last edited by Crosis; 09-19-2017 at 09:37 AM.
The following users liked this post:
Phat98 (01-21-2023)
#22
Instructor
O.K. here is the update for the trailer LED install.
It looks good when it arrived, for a $12.00 ea it sure looks good.
The fit and finish that went on to the car is better than expected. No extension is needed or use for the install. It is flush and looks almost OEM.
It took about an hour from the unpacking it to a one by one install and rechecking.
No hyper flasher with the Hyper flasher unit installed. The only thing is the hazard light blink a bit fast but that is about it. No error or what so ever so far.
It seem that I can'y upload any pictures. Sorry
It looks good when it arrived, for a $12.00 ea it sure looks good.
The fit and finish that went on to the car is better than expected. No extension is needed or use for the install. It is flush and looks almost OEM.
It took about an hour from the unpacking it to a one by one install and rechecking.
No hyper flasher with the Hyper flasher unit installed. The only thing is the hazard light blink a bit fast but that is about it. No error or what so ever so far.
It seem that I can'y upload any pictures. Sorry
#24
Instructor
One more try to import pictures of the install.
Arrive and unpacked.
LED on the left and OEM stock on the right.
LED on the left and stock bulb on the right.
Arrive and unpacked.
LED on the left and OEM stock on the right.
LED on the left and stock bulb on the right.
#25
Instructor
#26
Le Mans Master
Just an FYI,
Less expensive here and for some unknown reason the seller will sell you 6 lights for less than he will 4 lights
$60.98 for 6 shipped
http://www.ebay.com/itm/6-NEW-RV-CAM...UAAOSwBahVbcWA
or
63.49 for 4 shipped
http://www.ebay.com/itm/4-NEW-RV-CAM...8AAOSwBLlVbcSQ
Less expensive here and for some unknown reason the seller will sell you 6 lights for less than he will 4 lights
$60.98 for 6 shipped
http://www.ebay.com/itm/6-NEW-RV-CAM...UAAOSwBahVbcWA
or
63.49 for 4 shipped
http://www.ebay.com/itm/4-NEW-RV-CAM...8AAOSwBLlVbcSQ
#27
Instructor
Just an FYI,
Less expensive here and for some unknown reason the seller will sell you 6 lights for less than he will 4 lights
$60.98 for 6 shipped
http://www.ebay.com/itm/6-NEW-RV-CAM...UAAOSwBahVbcWA
or
63.49 for 4 shipped
http://www.ebay.com/itm/4-NEW-RV-CAM...8AAOSwBLlVbcSQ
Less expensive here and for some unknown reason the seller will sell you 6 lights for less than he will 4 lights
$60.98 for 6 shipped
http://www.ebay.com/itm/6-NEW-RV-CAM...UAAOSwBahVbcWA
or
63.49 for 4 shipped
http://www.ebay.com/itm/4-NEW-RV-CAM...8AAOSwBLlVbcSQ
That's the one I ordered. Now I have two extra LED light to play and see if there is any mod that I an do to it.
#28
Le Mans Master
Weird pricing...........
I wonder if I can get my current sequential tail light kit to work with these lights......will give it a try.
Last edited by jrprich; 09-22-2017 at 02:25 PM.
#29
Instructor
Thread Starter
Well, that looks fine to me!! I just ordered another six for ~$10 each, before they run out. The two extra ones will be good to play with... see if I can add additional LED's or something.
Look like they must have bought the old molds from GM sometime, and that's what's being used now to make new lenses for the RV's.
Andy
Look like they must have bought the old molds from GM sometime, and that's what's being used now to make new lenses for the RV's.
Andy
#30
Instructor
I don't see why not. I accidentally wire one of the wire backward and I have sequential lights, but that trigger the AH error. LOL
#31
Instructor
Well, that looks fine to me!! I just ordered another six for ~$10 each, before they run out. The two extra ones will be good to play with... see if I can add additional LED's or something.
Look like they must have bought the old molds from GM sometime, and that's what's being used now to make new lenses for the RV's.
Andy
Look like they must have bought the old molds from GM sometime, and that's what's being used now to make new lenses for the RV's.
Andy
Are you trying to corner the cheap LED market? LOL
#32
Instructor
Thread Starter
#33
Instructor
Andy,
I don't think that you will be able to corner the market with the trailer lights. Too many proud Corvette owners will not be caught dead with the trailer light installed on their Vette. They rather paid the big time Corvette tax and be able to tell everyone that they paid a lots of money for it. (Walking with chest sticks up in the air)
(Joking).
I don't think that you will be able to corner the market with the trailer lights. Too many proud Corvette owners will not be caught dead with the trailer light installed on their Vette. They rather paid the big time Corvette tax and be able to tell everyone that they paid a lots of money for it. (Walking with chest sticks up in the air)
(Joking).
#34
Drifting
Andy,
I don't think that you will be able to corner the market with the trailer lights. Too many proud Corvette owners will not be caught dead with the trailer light installed on their Vette. They rather paid the big time Corvette tax and be able to tell everyone that they paid a lots of money for it. (Walking with chest sticks up in the air)
(Joking).
I don't think that you will be able to corner the market with the trailer lights. Too many proud Corvette owners will not be caught dead with the trailer light installed on their Vette. They rather paid the big time Corvette tax and be able to tell everyone that they paid a lots of money for it. (Walking with chest sticks up in the air)
(Joking).
#36
Instructor
Thread Starter
#37
Instructor
The following users liked this post:
ArmchairArchitect (01-01-2018)
#40
Instructor
I ordered 2 pairs of these to connect up with the LED pigtails making the swap Plug & Play.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
But now they seem to be out of stock on Amazon.......but several similar on eBay
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
But now they seem to be out of stock on Amazon.......but several similar on eBay
looks nice and easy. but I just went ahead and cut the wires and spliced with a wire connector. Since my wires are already kind of cut for the led light that was installed by the previous owner between the exhaust pipes. so it was a good time to do some repairing and re-enforce the wires.