C7Carbon | Race Edition Front Splitter for C5 | 3D DESIGN, input welcome!!
#81
#83
Race Director
Member Since: Dec 2010
Location: Atlanta, GA
Posts: 10,426
Received 1,261 Likes
on
1,056 Posts
2020 Corvette of the Year Finalist (performance mods)
C5 of Year Winner (performance mods) 2019
when I saw c7carbon was the last poster I was hoping for an update
#84
Instructor
I just now discovered this thread so I am a little behind and may be too late to the game. I will go ahead and put my two cents in though.
The one thing I dislike about most front splitters I have seen for the C5 is they don't cover the curve under of the nose. It results in looking like you just stuck something on the bottom of the front bumper cover. That is the reason I have yet to buy a front splitter. The one I sort of like is the C7Carbon NON-Vented front splitter but it doesn't have the hole in the middle and blocks airflow, It does cover most of the roll under of the bumper cover all the way across and looks better than most others out there to me. It would be nice if you could somehow cover far enough up and include a piece that goes all the way across the top above the center hole to cover the roll. I realize this may be a challenge because of airflow but it would look a lot better to me. I would even be willing to cut the front bumper cover out to accommodate for a continuous top if it needed to notch into the bumper cover. I think there is a picture or two some others have posted of something similar where the bumper cover had to be notched. Anything to get rid of the rolled under nose would suit me better.
The one thing I dislike about most front splitters I have seen for the C5 is they don't cover the curve under of the nose. It results in looking like you just stuck something on the bottom of the front bumper cover. That is the reason I have yet to buy a front splitter. The one I sort of like is the C7Carbon NON-Vented front splitter but it doesn't have the hole in the middle and blocks airflow, It does cover most of the roll under of the bumper cover all the way across and looks better than most others out there to me. It would be nice if you could somehow cover far enough up and include a piece that goes all the way across the top above the center hole to cover the roll. I realize this may be a challenge because of airflow but it would look a lot better to me. I would even be willing to cut the front bumper cover out to accommodate for a continuous top if it needed to notch into the bumper cover. I think there is a picture or two some others have posted of something similar where the bumper cover had to be notched. Anything to get rid of the rolled under nose would suit me better.
Last edited by sly-1; 04-06-2018 at 10:41 AM.
The following users liked this post:
neutron82 (04-14-2018)
#88
Melting Slicks
love this! like the way the opening tilts toward the middle at the top. Would work well as a bases for track guys to open up the stock bumper a bit and even ad splitter length with full under tray.
#89
NCM Lifetime Member
Member Since: Aug 2015
Location: Cunningham, TN
Posts: 4,968
Received 3,929 Likes
on
2,014 Posts
2021 Corvette of the Year - Modified
2020 C5 of the Year Winner- Modified
C5 of Year Finalist (appearance mods) 2019
St. Jude Donor '18-'19-'20-'21-'22-'23-'24
#90
Platinum Supporting Vendor
Thread Starter
Thanks for bearing with us guys and sorry again to keep you waiting. Our design and development teams are working on this splitter and we'll make sure to post updates right away as soon as more info is available. Thanks again!
#91
Platinum Supporting Vendor
Thread Starter
Glad to inform that we finally have some pics to help showcase the latest updated version of this awesome splitter!
Please let us know your thoughts and thanks again!
Please let us know your thoughts and thanks again!
#93
Le Mans Master
Member Since: Aug 2009
Location: ALL governments are legalized mobsters, so doesn't matter where I live :(
Posts: 5,213
Received 184 Likes
on
133 Posts
Call me impressed! Really like the design and the way it stays on the leading edge of the bumper but comes out far enough to be functional and looks aggressive. What will the price be?
Last edited by STALION; 05-04-2018 at 08:23 AM.
#94
Platinum Supporting Vendor
Thread Starter
Thanks again for the feedback guys! Pricing will be available once the splitter is closer to be in production, we'll make sure to post all the details as soon as more info is available!
#99
Platinum Supporting Vendor
Thread Starter
UPDATE!
Here are some pics with the Race Edition under tray attached to the splitter. What do you think? let us know!
Here are some pics with the Race Edition under tray attached to the splitter. What do you think? let us know!