C7Carbon | Race Edition Front Splitter for C5 | 3D DESIGN, input welcome!!
01-24-2018, 02:59 PM
#62
Platinum Supporting Vendor
Thread Starter
01-24-2018, 03:10 PM
#63
Platinum Supporting Vendor
Thread Starter
Here are a couple of renders with the latest adjustments made to help improve the ground clearance. Let us know what you think! 
01-25-2018, 08:55 AM
#67
Le Mans Master
Member Since: Aug 2009
Location: ALL governments are legalized mobsters, so doesn't matter where I live :(
Posts: 5,213
Received 184 Likes
on
133 Posts
Ok, so height looks much better, the only critique I have would be lip length. It's hard to tell from those pics how far the lip extends out. You don't want it to dramatic, but it should come out from the bumper in order to look good and be functional. Is there a way to add in the rendering another inch to the lip and post different angles?
01-25-2018, 05:33 PM
#68
just make both, one aggressive and one more subtle
and more importantly make them out of polyurethane
and more importantly make them out of polyurethane
01-29-2018, 03:21 PM
#69
Platinum Supporting Vendor
Thread Starter
Thanks again for the input! Specs and updates for this splitter will be posted as soon as they become available. Stay tuned! 
01-30-2018, 12:58 AM
#70
Supporting Vendor
Member Since: May 2010
Location: Bell Buckle, TN
Posts: 6,811
Received 232 Likes
on
134 Posts
St. Jude Donor '11
Keep up the amazing work and thank you for dedicating time, money and materials into the C5. This generation of the Corvette may be aging but is has one hell of a following unlike any other 20 year old car.
02-12-2018, 04:04 PM
#71
Race Director
Member Since: Dec 2010
Location: Atlanta, GA
Posts: 10,426
Received 1,261 Likes
on
1,056 Posts
2020 Corvette of the Year Finalist (performance mods)
C5 of Year Winner (performance mods) 2019
any updates??
02-12-2018, 08:56 PM
#72
Platinum Supporting Vendor
Thread Starter
02-21-2018, 08:52 PM
#76
Race Director
Member Since: Dec 2010
Location: Atlanta, GA
Posts: 10,426
Received 1,261 Likes
on
1,056 Posts
2020 Corvette of the Year Finalist (performance mods)
C5 of Year Winner (performance mods) 2019
Last edited by neutron82; 02-21-2018 at 09:59 PM.
The following users liked this post:
STALION (02-22-2018)
03-08-2018, 01:17 PM
#79
Platinum Supporting Vendor
Thread Starter
Thanks again for bearing with us guys! ETA is not available yet, its been a slow go developing this splitter. Nonetheless, our design team is on top of this project and we'll make sure to post updates as soon as possible!
