VetteNuts C5 Corvette Double Din Bezel
#1
Supporting Vendor
Thread Starter
Member Since: May 2010
Location: Bell Buckle, TN
Posts: 6,811
Received 232 Likes
on
134 Posts
St. Jude Donor '11
VetteNuts C5 Corvette Double Din Bezel
This is your last chance to save $60 before the Bezels arrive at our facility Monday 3-19-18
Tracking numbers will be issued for new orders Wednesday/Thursday 3-20/21
Sale Ends Friday night at Midnight.
3-13-18
We just spoke with the port and they have the container unpacked and the bezels have been prepped for shipment to us. We have scheduled our freight company to pick up on Thursday and they will arrive Monday morning at our facility in TN. We will start printing labels on Thursday and Friday so when the pallets arrive we will begin sending out tracking numbers.
Again thank you all for hanging in there. This has been a long ride however its finally over and we can all get our audio systems installed just in time for Spring!
Introducing the VetteNuts MOLDED Double Din Radio Console for the C5 Corvette! Our radio consoles are injection molded the same way GM produced the originals by molding them with the texture in the mold, not a spray-on added later. This insures a uniform product every time. Unlike others on the market our console retains that factory GM look and feel while keeping the cigarette lighter door and cup holder lid intact.
These consoles have been custom produced using used factory bezels by hand for years. The problem was within the final product finish. The texture never did match the and there were so many complaints thats when we decided to spend the time to mold the bezel. Our C5's deserved a better product and you now how VetteNuts feels about C5's.
So the end result is the VetteNuts Double Din Bezel.
ORDER HERE
YOU WILL NOT FIND A BETTER LOOKING PRODUCT!
**This IS the actual product you will receive**
Tracking numbers will be issued for new orders Wednesday/Thursday 3-20/21
Sale Ends Friday night at Midnight.
3-13-18
We just spoke with the port and they have the container unpacked and the bezels have been prepped for shipment to us. We have scheduled our freight company to pick up on Thursday and they will arrive Monday morning at our facility in TN. We will start printing labels on Thursday and Friday so when the pallets arrive we will begin sending out tracking numbers.
Again thank you all for hanging in there. This has been a long ride however its finally over and we can all get our audio systems installed just in time for Spring!
Introducing the VetteNuts MOLDED Double Din Radio Console for the C5 Corvette! Our radio consoles are injection molded the same way GM produced the originals by molding them with the texture in the mold, not a spray-on added later. This insures a uniform product every time. Unlike others on the market our console retains that factory GM look and feel while keeping the cigarette lighter door and cup holder lid intact.
These consoles have been custom produced using used factory bezels by hand for years. The problem was within the final product finish. The texture never did match the and there were so many complaints thats when we decided to spend the time to mold the bezel. Our C5's deserved a better product and you now how VetteNuts feels about C5's.
So the end result is the VetteNuts Double Din Bezel.
ORDER HERE
YOU WILL NOT FIND A BETTER LOOKING PRODUCT!
**This IS the actual product you will receive**
Last edited by Marc@Vettenuts.net; 03-13-2018 at 04:33 PM.
The following users liked this post:
SG Lou (03-13-2018)
#2
Burning Brakes
Pmed you a couple days ago about this and about your sub boxes, but no response. I've tried calling too, hoping to catch someone who hasn't left yet but no luck. Your work hours and mine are the same so getting on the phone hasn't been working. Not your fault there obviously, I just haven't been able to get free to call during the day.
#4
Night Owl for life
Member Since: Nov 2003
Location: Bugs Bunny should'a made a left turn here
Posts: 23,198
Received 3,246 Likes
on
1,668 Posts
very cool!
#8
Supporting Vendor
Thread Starter
Member Since: May 2010
Location: Bell Buckle, TN
Posts: 6,811
Received 232 Likes
on
134 Posts
St. Jude Donor '11
Pmed you a couple days ago about this and about your sub boxes, but no response. I've tried calling too, hoping to catch someone who hasn't left yet but no luck. Your work hours and mine are the same so getting on the phone hasn't been working. Not your fault there obviously, I just haven't been able to get free to call during the day.
I am to! Installing one in my track car with a back up camera.
Yes it is!
Your welcome.
Glad you got in and it will look great with your 1400.
#9
Burning Brakes
I'd like to give a big THANK YOU!!!! to Marc. He spent almost an hour on the phone with me tonight getting everything sorted out, all of my questions answered, and an order placed. I really enjoyed the conversation and appreciate the help, especially after hours. Above and beyond. Thank you!
The following users liked this post:
emsteph (06-23-2023)
#11
Dude... that is welcome news.
After replacing my leaking rack and pinion, the new reman unit started leaking from the Magnasteer pigtail. Now I have to redo the whole job again.
This is a nice pick-me-up.
After replacing my leaking rack and pinion, the new reman unit started leaking from the Magnasteer pigtail. Now I have to redo the whole job again.
This is a nice pick-me-up.
#12
Supporting Vendor
Thread Starter
Member Since: May 2010
Location: Bell Buckle, TN
Posts: 6,811
Received 232 Likes
on
134 Posts
St. Jude Donor '11
Shawn and I are still in the office getting out the remainder of the tracking numbers tonight. We will be done tonight!
This lady has been working tirelessly to get the mountain of orders shipped. Thank you Shawn!!
This lady has been working tirelessly to get the mountain of orders shipped. Thank you Shawn!!
The following 2 users liked this post by Marc@Vettenuts.net:
Raiden8816 (03-23-2018),
Route99 (03-31-2018)
#13
Is VetteNuts still around?
I just tried to call VetteNuts since I had ordered a radio bezel and none of the phone lines work. Did something happen to them? I just talked with Marc a couple of months ago.
#14
Instructor
I just placed an order last week and received it on Saturday, so seems like they are still doing business as usual. I did have a problem with my order though so lets see how long it takes to hear back.
#15
NCM Lifetime Member
Member Since: Aug 2015
Location: Cunningham, TN
Posts: 4,968
Received 3,929 Likes
on
2,014 Posts
2021 Corvette of the Year - Modified
2020 C5 of the Year Winner- Modified
C5 of Year Finalist (appearance mods) 2019
St. Jude Donor '18-'19-'20-'21-'22-'23-'24
They have had a lot of issues with their phones there in the past. Try shooting him an email marc@vettenuts.net