[Z06] HELP! Bump in body panel on underside of the front bumper
#1
HELP! Bump in body panel on underside of the front bumper
Not sure where my last thread/post went. See picture below. What is this bump? Is this from some heat or flooding or some sort of damage? Or is it made like that as a cutout / allows space for hosing? Thanks a bunch!
Driver's side above air dam.
Driver's side above air dam.
#3
Team Owner
Member Since: Jul 2016
Location: The Steel City, Colorful Colorado
Posts: 25,306
Received 1,679 Likes
on
1,182 Posts
Winner 2020 C7 of the Year - Modified
That's normal.
#4
#7
Team Owner
Member Since: Jul 2016
Location: The Steel City, Colorful Colorado
Posts: 25,306
Received 1,679 Likes
on
1,182 Posts
Winner 2020 C7 of the Year - Modified
damn pic keeps turning sideways on me when I upload it. Anyway, that's how your bumper was molded.
By the way, your other Thread on this is here - https://www.corvetteforum.com/forums...nt-bumper.html
You should PM a Moderator and ask them to delete it.
#8
sure
damn pic keeps turning sideways on me when I upload it. Anyway, that's how your bumper was molded.
By the way, your other Thread on this is here - https://www.corvetteforum.com/forums...nt-bumper.html
You should PM a Moderator and ask them to delete it.
damn pic keeps turning sideways on me when I upload it. Anyway, that's how your bumper was molded.
By the way, your other Thread on this is here - https://www.corvetteforum.com/forums...nt-bumper.html
You should PM a Moderator and ask them to delete it.
#9
Team Owner
Member Since: Jul 2016
Location: The Steel City, Colorful Colorado
Posts: 25,306
Received 1,679 Likes
on
1,182 Posts
Winner 2020 C7 of the Year - Modified
See, you are good to go and all is well.
#10
How about something like this. Should this bother me? Should i put some protective coating over it so it doesn't get worse? Maybe get the back side of it as well if possible? Thanks!
#11
Team Owner
Member Since: Jul 2016
Location: The Steel City, Colorful Colorado
Posts: 25,306
Received 1,679 Likes
on
1,182 Posts
Winner 2020 C7 of the Year - Modified
I'd just clean it and put a couple dabs of touch-up paint on that, followed up by a few dabs of clear and call it good.
#12
#13
Drifting
Have to edit my post above. I had looked at my passenger side at first and that bump is not there, it is totally flat, but I do have that bump on the driver's side. There is a metallic object or frame member behind that spot underneath that bump, but it's raining outside now so I can;t really look at it. Maybe we can see what's under there from a parts' explosion diagram.
#14
Le Mans Master
#15
#16
Le Mans Master
#19
Le Mans Master