Cup Holder made from materials lying around the garage
#43
Le Mans Master
Member Since: Jun 2007
Location: Eastern Corn-Nation
Posts: 6,779
Received 3,866 Likes
on
1,672 Posts
2015 C5 of the Year Winner
Snapped a shot of mine yesterday to show how clean and unobtrusive this thing is. Mine does not have the engraved logo. The bottom rear section of the ring has a slight recess built in to it. This is so it clears the curved section of your dash, and so it rests flush against it. Basically, your cup holder door isn't the only thing supporting this, The edge of your console supports the ring's opposite side. It is very stable.
#46
Racer
I got the one piece dual cupholder for like 20 bucks that fits between the floor and part of the console/dash on the passenger side. It hasn't let me down yet, and I don't have to reach behind me for my beverage. Very cool handy work though, kind of dig the idea of using the pine for the box portion.
#47
Le Mans Master
Member Since: Jun 2007
Location: Eastern Corn-Nation
Posts: 6,779
Received 3,866 Likes
on
1,672 Posts
2015 C5 of the Year Winner
#48
Le Mans Master
Not yet, but I don't use it very often. It is definitely something I have thought about, and I may add a small piece of black electrical tape where it contacts to act as a cushion. I haven't seen any other users make any posts about long-tern wear, so it may not be an issue.
#49
Le Mans Master
Member Since: Jun 2007
Location: Eastern Corn-Nation
Posts: 6,779
Received 3,866 Likes
on
1,672 Posts
2015 C5 of the Year Winner
Found them in the mailbox this morning when I got home from work...Very cool product.
I also ordered his plugs that go behind the inside door handle. Lifetime warranty!
I also ordered his plugs that go behind the inside door handle. Lifetime warranty!
The following users liked this post:
FYRARMS (08-17-2018)
#51
Le Mans Master
The following users liked this post:
mstromquist (08-17-2018)
#52
Drifting
Got mine yesterday and tried it out when I got home from work. It is a very nice piece - being an automotive engineer I love the simple and elegant design as well as the ease of use factor. I was I bit over optimistic to think it would work with the Yeti - but to be fair the Yeti does not fit in the current Travel Buddy (nor does it fit in the wife's car, it only fits in the truck's console which is fine for most days since the Corvette is not my daily driver). Will try it out on tomorrow's road trip. Hopefully I can remove the Travel Buddy - that will restore some knee/leg room for the wife and make her happier - not likely, but you can always hope
#53
Le Mans Master
Member Since: Jun 2007
Location: Eastern Corn-Nation
Posts: 6,779
Received 3,866 Likes
on
1,672 Posts
2015 C5 of the Year Winner
Mine didn't fit my yeti either. Still a cool product and will come in very handy.
#54
Safety Car
I always have to applaud when a guy can repurpose unused stuff in a cool way. For me, I made a move on my piggybank, and went with a double travel buddy. I justified the price by pretending it was for a cup holder for a boat and that I was getting off cheap.
I prefer a design where I reach forward for needed items, but, unlike the other poster, never felt the double travel buddy was intrusive.
I did have a price objection, felt it was too high, but I can justify anything.
In this case, the amount of C5 owners in the world is getting smaller, and less and less of those people are going too feel they need a cup holder. At some point in the future , C5 cup holders will be unprofitable, and it will be do it yourself,or luck out with a happy coincidence. So I pay the guy a profit, hopefully he says in business supporting the C5, and, if my car stays on the road long enough, i will have a period correct cup holder from back in the day I told you I could justify stuff, in this case the price of a double travel buddy. I say that had a difficulty rating of at least an eight.
I prefer a design where I reach forward for needed items, but, unlike the other poster, never felt the double travel buddy was intrusive.
I did have a price objection, felt it was too high, but I can justify anything.
In this case, the amount of C5 owners in the world is getting smaller, and less and less of those people are going too feel they need a cup holder. At some point in the future , C5 cup holders will be unprofitable, and it will be do it yourself,or luck out with a happy coincidence. So I pay the guy a profit, hopefully he says in business supporting the C5, and, if my car stays on the road long enough, i will have a period correct cup holder from back in the day I told you I could justify stuff, in this case the price of a double travel buddy. I say that had a difficulty rating of at least an eight.