When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Taking a little poll here. I put these Weld Racing Evo's on my 2001 Magnetic Red convertible about 12 years ago. They are 18x9.5 up front and 20x11 in the rear. I have since become bored with the chrome and have decided I have two options. Strip the chrome and powder coat black, or sell them and buy some factory C6 Z06 or C7 Grand Sport wheels. I am installing my L5 2' rear fenders in a couple of weeks so the wheels are on my mind at the moment. I will be putting some nice new fat rubber on as well.
I agree.. sell them . If you were my son or my brother I would tell you that these wheels at 11 inches wide in the rear will not fill up a 13 inch wide wheel well when you add the 2 inches of flared quarter panel. Do it right. buy New ( correct size wheels for the wide body Quarters.. you dont want to use spacers..
Bill aka ET
Last edited by Vetteman Jack; 12-07-2018 at 09:45 AM.
12-07-2018, 09:17 AM
Weld Racing wheels, replace or refinish?
