***Radioflyer's "Luminator" Low-Rise Headlights GP!!***
#1
Supporting Vendor
Thread Starter
***Radioflyer's "Luminator" Low-Rise Headlights GP!!***
After working out the kinks, we're proud to announce the re-release of the definitive low-rise headlight solution for the C5 corvette. The Radioflyer "Luminator" Headlight system uses dual Hella 60mm projectors and HID/LED light sources to provide stunning appearance and equally impressive performance. The Lifting arm issues have been remedied by replacing the aluminum components with steel and the shrouds will now be made of cast urethane (same as the front bumper) instead of 3D printing for nice smooth finish and ease of production. (no more 3D print lines)
Low beam: No glare to oncoming traffic
Low beam only (one side)
Low + High beam (one side)
A few questions I'm often often asked:
Q: How does it perform compared to our other headlight systems:
A: The low beam total output is the same, but the pattern is a little narrower and the step a little higher. While there is no "dual-function" projector, the dedicated high beam projector features a 3000 Lumen LED light source that really turns night into daytime.
Q: How do you change the lift of the headlight?
A: The headlight lift is changed by the included lifting arm assembly which has slightly different dimensions from the factory arms. No permanent modifications (drilling/cutting) to your headlights are required
Q: Can the shrouds be painted?
A: Yes, the Shrouds are the same type material as the front bumper and can be painted to match the car or a textured black to mimic the factory ABS look.
The GP price will be a slight discount off the normal price and will last through Valentines Day at which point I will begin ordering the minimum parts needed for this GP.
Order here:
https://radioflyerinnovations.com/sh...dlights-for-c5
Low beam: No glare to oncoming traffic
Low beam only (one side)
Low + High beam (one side)
A few questions I'm often often asked:
Q: How does it perform compared to our other headlight systems:
A: The low beam total output is the same, but the pattern is a little narrower and the step a little higher. While there is no "dual-function" projector, the dedicated high beam projector features a 3000 Lumen LED light source that really turns night into daytime.
Q: How do you change the lift of the headlight?
A: The headlight lift is changed by the included lifting arm assembly which has slightly different dimensions from the factory arms. No permanent modifications (drilling/cutting) to your headlights are required
Q: Can the shrouds be painted?
A: Yes, the Shrouds are the same type material as the front bumper and can be painted to match the car or a textured black to mimic the factory ABS look.
The GP price will be a slight discount off the normal price and will last through Valentines Day at which point I will begin ordering the minimum parts needed for this GP.
Order here:
https://radioflyerinnovations.com/sh...dlights-for-c5
Last edited by TheRadioFlyer; 02-06-2019 at 09:38 AM.
The following users liked this post:
CorvetteBrent (03-15-2019)
#2
Very interested! Clicked on the link, nothing came up. Please let me know how I can get in touch with you to get a price and a deposit going.
Thank you
Thank you
Last edited by arthursc2; 02-06-2019 at 11:04 AM.
#3
Supporting Vendor
Thread Starter
#4
Team Owner
Member Since: Jul 2016
Location: The Steel City, Colorful Colorado
Posts: 25,306
Received 1,679 Likes
on
1,182 Posts
Winner 2020 C7 of the Year - Modified
Just my luck that this was upgraded and re-released right after I purchased and installed your Bi-Xenon ACAs
The following users liked this post:
chasboy (02-06-2019)
#5
Burning Brakes
Member Since: Nov 2002
Location: Houston Texas
Posts: 1,026
Received 266 Likes
on
130 Posts
2024 Corvette of the Year Finalist - Modified
2023 C5 of the Year Winner - Modified
2023 Corvette of the Year Finalist (C8) - Modified
2023 Corvette of the Year Finalist (C6) - Modified
2022 C8 of the Year Winner - Modified
2022 C6 of the Year Winner - Modified
Will the new design satisfy the "headlight jiggle"? I have the ACAs which jiggle. Thanks
The following users liked this post:
oh1c5Pewter (03-08-2021)
#6
NCM Lifetime Member
Member Since: Aug 2015
Location: Cunningham, TN
Posts: 4,968
Received 3,929 Likes
on
2,014 Posts
2021 Corvette of the Year - Modified
2020 C5 of the Year Winner- Modified
C5 of Year Finalist (appearance mods) 2019
St. Jude Donor '18-'19-'20-'21-'22-'23-'24
I need the new shrouds. How do I get them?
#7
Supporting Vendor
Thread Starter
email: president@radioflyerinnovations.com. I will have extra shrouds made for previous customers to purchase at a VERY reasonable cost.
The following users liked this post:
CorvetteBrent (03-15-2019)
#8
Drifting
hmmm, as in interested.
Last edited by bigsapper; 02-07-2019 at 07:40 PM.
#11
Melting Slicks
I know it would be a pain, but I would really like to see a side-by-side of stock versus low-rise, possibly a mid-install with one light open to stock height and the other at the low rise. I see the low rise height, but without a reference I have trouble visualizing just how low it is.
#12
Supporting Vendor
Thread Starter
I know it would be a pain, but I would really like to see a side-by-side of stock versus low-rise, possibly a mid-install with one light open to stock height and the other at the low rise. I see the low rise height, but without a reference I have trouble visualizing just how low it is.
If i recall, there is about a 2.5" total rise difference at the inboard corner.
The following 2 users liked this post by TheRadioFlyer:
CorvetteBrent (03-15-2019),
redzg (02-10-2019)
#13
Stock rise height is 6 3/4 if I remember correctly offhand. I believe radioflyer has his set at 4" when open. It is noticably lower both inside and out. I don't own a set but have been working on my own set that is similar. Those are just measurements I remember off the top of my head, don't quote me on it.
The following users liked this post:
CorvetteBrent (03-15-2019)
#16
Supporting Vendor
Thread Starter
The shop making the shrouds has indicated they needed a little more time than anticipated to prepare the tools to make the shrouds. The first batch of shrouds is scheduled to be finished by the first week of March. Apologies for any delays. I will keep everyone up to date here. Everything else is on schedule.
#17
Supporting Vendor
Thread Starter
Update: Shroud master molds have been completed. Urethane casting is underway. Here are photos of the master molds. Notice how smooth they are.
The following users liked this post:
DNAST1 (03-03-2019)
#19
Supporting Vendor
Thread Starter
Great news! Just got the first batch of shrouds from the shop and they are AWESOME. They are even more sturdy than factory and unlike previous versions there are absolutely no "print lines". The shop suggested using a primer coat before paint. Customers seeking to paint-match will find the surface already just as smooth as body panels with no sanding needed. (see photos)
I expect all current orders to go out Tomorrow!!!
I expect all current orders to go out Tomorrow!!!
The following users liked this post:
CorvetteBrent (03-15-2019)
#20
NCM Lifetime Member
Member Since: Aug 2015
Location: Cunningham, TN
Posts: 4,968
Received 3,929 Likes
on
2,014 Posts
2021 Corvette of the Year - Modified
2020 C5 of the Year Winner- Modified
C5 of Year Finalist (appearance mods) 2019
St. Jude Donor '18-'19-'20-'21-'22-'23-'24
Order placed for the new shrouds. These look more like the quality I’ve come to expect from your products. I only wish I had waited for these shrouds to be produced before purchasing the luminator low rise light kit. It would have saved me a lot of $$$