F*S* 4 BRAND NEW BBS LM's 18x10 PICS >>>>
06-25-2006, 06:56 AM
#1
Le Mans Master
Thread Starter
F*S* 4 BRAND NEW BBS LM's 18x10 PICS >>>>
THIS SET IS SOLD, enjoy a stunning set of BBS's!!
This set of four 18x10's are NEW NEVER MOUNTED ! I was going to go all 18's but changed my mind. 3 of the wheels had tires mounted when I changed my mind. One wheel has a few slight paint rubs (these are NOT gouges in the aluminum ) from the knucklehead tire installer. Tires should cover these small marks. ( His funeral was last Wed.
)3 wheels have tire valves installed, all 4 have BBS chrome lug nuts. These wheels check out perfectly true and round on a Hunter computerized machine.
These are 2 pc. FULLY FORGED wheels. 23.0 lbs. , 54mm offset, 7 5/8 backspace. bolt pattern is for vettes 5 lug 4.75 Pressure sensors fit fine. These wheels are $3500 for the set at tirerack Priced at $2570 including shipping !
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
This set of four 18x10's are NEW NEVER MOUNTED ! I was going to go all 18's but changed my mind. 3 of the wheels had tires mounted when I changed my mind. One wheel has a few slight paint rubs (these are NOT gouges in the aluminum ) from the knucklehead tire installer. Tires should cover these small marks. ( His funeral was last Wed.
)3 wheels have tire valves installed, all 4 have BBS chrome lug nuts. These wheels check out perfectly true and round on a Hunter computerized machine.These are 2 pc. FULLY FORGED wheels. 23.0 lbs. , 54mm offset, 7 5/8 backspace. bolt pattern is for vettes 5 lug 4.75 Pressure sensors fit fine. These wheels are $3500 for the set at tirerack Priced at $2570 including shipping !
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]
Last edited by mrm1149; 09-14-2006 at 02:25 PM.
06-26-2006, 07:16 PM
#3
Le Mans Master
Thread Starter
tires would be 265/35x18 fronts and 295/35x18 rears. That achieves the proper rake for our cars.... I have speed lingerie also and there is room for it without a problem. The front duct clears although it's close.
I know there are quite a few guys on here running 18x10 on the front and I'd guess a few may have trimmed the ducts a little for comfort.
MIKE
I know there are quite a few guys on here running 18x10 on the front and I'd guess a few may have trimmed the ducts a little for comfort.
MIKE
Last edited by mrm1149; 06-26-2006 at 10:35 PM.
07-01-2006, 04:45 PM
#4
Le Mans Master
Thread Starter
Here are a few shots on Vettes.......
Last edited by mrm1149; 08-15-2006 at 08:44 AM.
07-01-2006, 10:14 PM
#6
Le Mans Master
Thread Starter
[QUOTE=TonyC5]Mike is a good guy, someone must need this GREAT wheels!!!!
Thanks Tony...The BBS's are kinda like understated elegance. You gotta be aware of the race history they have. They DO draw the looks
Thanks Tony...The BBS's are kinda like understated elegance. You gotta be aware of the race history they have. They DO draw the looks
07-02-2006, 05:21 AM
#8
Le Mans Master
Thread Starter
Originally Posted by FixedRoof
If I could put 335's on them.. I'd buy them.... oh well...
07-02-2006, 09:15 AM
#9
Race Director
Member Since: Feb 2003
Location: Everyday you must choose between the pain of discipline and the pain of regret. Fredericktown, OH
Posts: 18,484
Likes: 0
Received 1 Like
on
1 Post
I can't believe this set of wheels hasn't sold. I think they are great looking on a C5 . . . then again, I am a bit biased. See sig.
07-02-2006, 11:45 AM
#10
Le Mans Master
Thread Starter
Originally Posted by LT-4 CE
I can't believe this set of wheels hasn't sold. I think they are great looking on a C5 . . . then again, I am a bit biased. See sig.
07-15-2006, 09:01 AM
#12
Melting Slicks
Originally Posted by Mark08
Does it matter...
Seems he always sells quality parts at reasonable prices, and no complaints.
Doesn't get any better than that. If I didn't just put 06- Z-06 rims on the wifes 98, I'd be all over them.
Rick
07-27-2006, 10:03 PM
#13
Melting Slicks
Member Since: Aug 2004
Location: Plainfield Ill.
Posts: 2,879
Likes: 0
Received 0 Likes
on
0 Posts
Hello Mike,
I've seen you post this many times, and I wished I have the money to buy it from you. These are great looking wheels and I'm surprised nobody have taken these yet, at your price this is a steal, so here's a TTT for you.
PS, can you do layaway for 1 1/2 years
J/K
I've seen you post this many times, and I wished I have the money to buy it from you. These are great looking wheels and I'm surprised nobody have taken these yet, at your price this is a steal, so here's a TTT for you.
PS, can you do layaway for 1 1/2 years
J/K
07-28-2006, 06:34 AM
#14
Le Mans Master
Thread Starter
Originally Posted by slverc5
Hello Mike,
I've seen you post this many times, and I wished I have the money to buy it from you. These are great looking wheels and I'm surprised nobody have taken these yet, at your price this is a steal, so here's a TTT for you.
PS, can you do layaway for 1 1/2 years J/K
I've seen you post this many times, and I wished I have the money to buy it from you. These are great looking wheels and I'm surprised nobody have taken these yet, at your price this is a steal, so here's a TTT for you.
PS, can you do layaway for 1 1/2 years
J/KLast edited by mrm1149; 07-29-2006 at 04:20 PM.
08-03-2006, 08:36 AM
#18
Le Mans Master
Thread Starter
Originally Posted by ravage_
if you take $2200 shipped to 96817 im all over it.
let me know.
thanks
let me know.
thanks
Appreciate the offer Blane..have to pass on $2200 shipped all the way to Hawaii
I'll consider offers however.
Last edited by mrm1149; 09-13-2006 at 08:58 PM.