'02 Ls6 F/s
#1
Melting Slicks
Thread Starter
'02 Ls6 F/s
Bought this from another member to install but never got around to it. It has about 9,800 miles and was swapped out for a stroker. Some items were used on the new motor. Here is a list of the parts that were removed from the engine to be reused on the new engine.
- Oil Deflector (windage tray)
- Oil Pickup Tube
- 2 Oil Galley Plugs
- 2 Coolant Jacket Plugs
- 2 Bellhousing Pins
- Crank Sensor
- Rear Crank Cover
- Front Coolant Crossover
- Rear Coolant Plugs
- Water pump
- Coil packs
- Fuel rails
- Rocker arms and pedestals
But you do get
Long block
Stock intake and throttle body
Stock clutch and flywheel
Stock exhaust manifolds
Stock injectors
Stock oil pump and timing chain
Spark plug wires
Thermostat
Asking $3,200.00 . Please pm if interested. Thanks.
- Oil Deflector (windage tray)
- Oil Pickup Tube
- 2 Oil Galley Plugs
- 2 Coolant Jacket Plugs
- 2 Bellhousing Pins
- Crank Sensor
- Rear Crank Cover
- Front Coolant Crossover
- Rear Coolant Plugs
- Water pump
- Coil packs
- Fuel rails
- Rocker arms and pedestals
But you do get
Long block
Stock intake and throttle body
Stock clutch and flywheel
Stock exhaust manifolds
Stock injectors
Stock oil pump and timing chain
Spark plug wires
Thermostat
Asking $3,200.00 . Please pm if interested. Thanks.
Last edited by Too Slow '90; 09-06-2006 at 05:47 PM.
#2
Race Director
Sorry, no OBO...the rules below.
http://forums.corvetteforum.com/show....php?t=1324902
You can always lower the price, good luck
http://forums.corvetteforum.com/show....php?t=1324902
You can always lower the price, good luck
#8
Melting Slicks
Thread Starter
Originally Posted by ISeeRed
Do you have the AIR tubes that go to the exhaust manifolds on both sides??????
Thanks,
Ray
Thanks,
Ray
Sent you a pm