WTB Z06 short stock shifter. 2003
#1
Instructor
Thread Starter
Member Since: Sep 2004
Location: Shawnee Oklahoma
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
WTB Z06 short stock shifter. 2003
I have a 2003 Z06. I like the way it shifts but would like the shifter to be shorter. I had a Short throw ripper before and it was to stiff. I would like the stock short shifter for a good price.
Tracy
Tracy
Last edited by Barnett; 09-06-2008 at 11:12 AM.
#2
Melting Slicks
Why don't you just shorten yours and save the money?
Sent you a PM with info on how to shorten the stock shifter.
Sent you a PM with info on how to shorten the stock shifter.
Last edited by Greg_E; 09-06-2008 at 02:12 PM.
#5
Race Director
I have the original Z06 shifter that I removed from my '04 Z16 at approx. 4,000 miles.
It's already been shortened at the top by exactly 3/4" so the **** sits lower. You can use any after market **** that is 9/16-18" or you could (probably) still use the oem **** if that's your preference. It includes the alignment pin and four oem 1/4-20 bolts.
PM me if you're interested (**** is sold). It is an easy DIY project if you decide to shorten yours, yourself. You don't necessarily have to even remove the shifter from the car.
It's already been shortened at the top by exactly 3/4" so the **** sits lower. You can use any after market **** that is 9/16-18" or you could (probably) still use the oem **** if that's your preference. It includes the alignment pin and four oem 1/4-20 bolts.
PM me if you're interested (**** is sold). It is an easy DIY project if you decide to shorten yours, yourself. You don't necessarily have to even remove the shifter from the car.
Last edited by hotwheels57; 09-06-2008 at 02:08 PM.