0HinsonSuperCars

Hinson Motorsports is now carrying American Racing Headers!

With race inspired technology built into every system, you're looking at the very best the performance exhaust industry has to offer. These are manufactured using the highest quality 304 S/S available and require no modifications to install. All systems come standard with merge collectors with scavenger spikes. ARH also uses the highest quality and best flowing metallic substrate catalytic converters available and all systems assemble with Grade 8 hardware and HD S/S band clamps.

• U.S. made 304 Stainless Steel (Does not require coating)
• Excellent fitment
• Includes extra 02 Bung for Wideband
• Comes standard with Merge Collectors

FREE SHIPPING!

Headers
$935 - ARH 1 3/4" Long Tube Headers
$935 - ARH 1 7/8" Long Tube Headers
$1077 - ARH 2" Long Tube Headers

X-Pipes
$540 - ARH 3x2.5" X-Pipe (Off Road)
$542 - ARH 3x3" X-Pipe (Off Road)
$740 - ARH 3x2.5" X-Pipe (Cats)
$740 - ARH 3x3" X-Pipe (Cats)

Options
$95 - LS7 Flange

casisthefirst

how long is the sale going on for?

0HinsonSuperCars

There is no end date.

Seth

LemansBlueZ06vegas

Dyno tested on each set-up on vette z06 with 91 octane? If so what's the WHP gain? Thanks.

0HinsonSuperCars

On a bolt-on LS1/LS6 car, gains are usually 20+ rwhp.

Thanks
Seth

jsrmonster

nice - gotta save some $$$ for this!

Can you get these ceramic coated to cut down on heat? or better to just wrap them?

Jeff

0HinsonSuperCars

Jeff,

We do not coat any of our 304 stainless headers. But if you must have it, we can certainly have them shipped to Jet Hot or Swain for you.

Thanks
Seth

OOGreen

What other parts, gaskets or clamps might be needed to install 1 7/8 headers with 3" Catted X-Pipes on '00 Coupe?

0HinsonSuperCars

They come with everything you need, no other parts are required.

Thanks
Seth

thechosenone

Any Military discount for active duty on these?

Vetteman Jack

Any discount for retired military? Worth a shot.

0HinsonSuperCars

Please give us a call at 205-267-6387.

Thanks
Seth

ILM-Express

bump

ILM-Express

had2have-it

The more I look at the ARH's the more I like 'em. For a '01 6spd C5 that needs the xpipe to end with 2.5" can the reduction from 3 to 2.5 still be had towards the end of the pipes or only right behind the cats? Any downside to ceramic coating the headers? thanks

0HinsonSuperCars

Both standard X-Pipes have a 2.5" connection point at the end to connect to a regular size 2.5" Axle Back. The difference is that the 3" x 3" is 3" in the middle. 3" at the end connection point is also available for those that have a 3" Axle Back. Coating isn't necessary on 304 stainless steel. We do not coat any of our 304 stainless headers. The downside would be the cost and downtime.

Thanks
Seth

silvermusclez

if I got the system with cats, will I pass inspection and emissions?

thechosenone

Your in Texas you can pass with no cats in our state. I just did, just get a tune and you will be fine.

0HinsonSuperCars

That's going to depend on many variables.

Thanks.

Seth

0HinsonSuperCars

Thanks for your orders!