NEW! Urethane Engine & Transmission Mounts
#1
Former Vendor
Thread Starter
NEW! Urethane Engine & Transmission Mounts
We are proud to release our newest upgrade for the LSx family!
Interlocking Urethane Engine Mounts for the Corvette C5/C6/Z06
MADE IN THE USA!!!
These urethane engine mounts are designed for a great balance between engine control and vibrations. They have been tuned for both street and track applications. Replace your stock rubber mounts for improved throttle response and reduced engine movement.
Features
* Designed for street and race cars
* Direct replacement for stock rubber mount
* Uses factory metric nuts (not included)
* Stainless Steel construction for rust free operation
* Interlocking design for fail safe operation
* Uses factory heat shield (factory heat shield is required)
* Fast installation
Applications
* 1997-2012 Corvette C5/C6/C6Z06
* 2004-2006 Pontiac GTO
$165 - Urethane Engine Mounts C5/C6/Z06 (OEM Standard Height)
$165 - Urethane Engine Mounts (Shorter Version) C5/C6/Z06 (.360" Shorter)
$173 - Urethane Transmission Mount C5
$300 - Urethane Engine & Transmission Mounts Combo C5
*Dealers Welcome
Interlocking Urethane Engine Mounts for the Corvette C5/C6/Z06
MADE IN THE USA!!!
These urethane engine mounts are designed for a great balance between engine control and vibrations. They have been tuned for both street and track applications. Replace your stock rubber mounts for improved throttle response and reduced engine movement.
Features
* Designed for street and race cars
* Direct replacement for stock rubber mount
* Uses factory metric nuts (not included)
* Stainless Steel construction for rust free operation
* Interlocking design for fail safe operation
* Uses factory heat shield (factory heat shield is required)
* Fast installation
Applications
* 1997-2012 Corvette C5/C6/C6Z06
* 2004-2006 Pontiac GTO
$165 - Urethane Engine Mounts C5/C6/Z06 (OEM Standard Height)
$165 - Urethane Engine Mounts (Shorter Version) C5/C6/Z06 (.360" Shorter)
$173 - Urethane Transmission Mount C5
$300 - Urethane Engine & Transmission Mounts Combo C5
*Dealers Welcome
Last edited by HinsonSuperCars; 07-18-2012 at 04:54 PM.
#2
Former Vendor
Thread Starter
As you can see in the below cut away image, the engine rides on the durable urethane. This is how we control engine movement while not passing every vibration in to the passenger compartment.
The inside of the mount is interlocked. Even if you found a way to damage the mount, the stainless interlocking design will keep it all together. The design is built with stainless steel, so they will not rust. They accept your factory nuts. This means there will be no emergency hardware store trips.
The inside of the mount is interlocked. Even if you found a way to damage the mount, the stainless interlocking design will keep it all together. The design is built with stainless steel, so they will not rust. They accept your factory nuts. This means there will be no emergency hardware store trips.
#3
Le Mans Master
I have been on the fence for 3 weeks as to replace or not replace the stock mounts on my Z. I dont drag much but figure if I have the motor out and a new monster going in I might as well replace them. What to do.
#4
Former Vendor
Thread Starter
#6
Former Vendor
Thread Starter
#8
Former Vendor
Thread Starter
#11
I might be interested in a set. So are you guys developing some type of trans brace to go along with these mounts?
These look like an awesome alternative for Vettes predominantly on the street who are not wanting the harshness of solid mounts. Great work!
These look like an awesome alternative for Vettes predominantly on the street who are not wanting the harshness of solid mounts. Great work!
#12
Former Vendor
Thread Starter
Thanks!
Seth
#14
Former Vendor
Thread Starter
#15
Race Director
Labor time estimate to swap these out for stockers in a car that is already built?
#16
Former Vendor
Thread Starter
#18
Former Vendor
Thread Starter