FS-408ci LQ9 Forged Motor w/D-1SC Procharger(8-Rib)
#1
Advanced
Thread Starter
Member Since: Oct 2008
Location: Canton Michigan
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
FS-408ci LQ9 Forged Motor w/D-1SC Procharger(8-Rib)
For sale is a complete 408 cubic inch LQ9 Iron motor with D-1SC Procharger with 8-Rib pulley kit. This motor/supercharger combo was recently taken out of a 1998 Corvette and made 760hp/647tq at 10#'s of boost. This motor only has 15,700 miles on it and runs perfectly with zero issues only reason for selling is due to an up coming wedding and I would like to put money into some other projects. This motor is rated to handle 950+ hp and has been so much fun to drive these past years. Here are the specs of the motor and supercharger if anyone has any questions feel free to message me and I will respond as fast as I can. I would also be willing to freight the motor to anywhere in the USA and will add freight charged depending on what it costs me I wont charge a penny more.
Texas Speed 408ci Long Block 10.5/1 CR
Eagle 4" Crank
Eagle 6.124 H-Beam Connecting Rods
Diamond Racing Forged Pistons
ARP Main Studs
PRC Stage 3 72cc Heads
LS7 Lifter Kit
Melling High Volume Oil Pump
ATI Super Damper with pinned crank
East Coast Supercharging Blower Spec Cam
A&A Corvette D-1SC Procharger/Large Single Front Mount Intercooler-Head Unit was inspected less than 1000miles ago and all seals were replaced and given a clean bill of health
A&A Corvette 8-Rib Pulley kit with 10% overdrive balancer
Brand New OEM Water Pump
East Coast Supercharging Power Steering Pump Kit with Fixed Idler
60# Mototron Injectors
High Flow Fuel Rails
LS1 Intake Manifold
LS1 Throttle Body
I'm not exactly sure how to put pictures in the post so if anyone wants pictures send me a pm with your email and ill be more than happy to send you some. I think thats all the big stuff if anyone has any questions on any of the smaller details feel free to PM. This is a 100% complete motor and superchager kit thats ready to drop in, tune and go.
Asking price for everything is $10,000 OBO
Prefered method of payment is paypal
Texas Speed 408ci Long Block 10.5/1 CR
Eagle 4" Crank
Eagle 6.124 H-Beam Connecting Rods
Diamond Racing Forged Pistons
ARP Main Studs
PRC Stage 3 72cc Heads
LS7 Lifter Kit
Melling High Volume Oil Pump
ATI Super Damper with pinned crank
East Coast Supercharging Blower Spec Cam
A&A Corvette D-1SC Procharger/Large Single Front Mount Intercooler-Head Unit was inspected less than 1000miles ago and all seals were replaced and given a clean bill of health
A&A Corvette 8-Rib Pulley kit with 10% overdrive balancer
Brand New OEM Water Pump
East Coast Supercharging Power Steering Pump Kit with Fixed Idler
60# Mototron Injectors
High Flow Fuel Rails
LS1 Intake Manifold
LS1 Throttle Body
I'm not exactly sure how to put pictures in the post so if anyone wants pictures send me a pm with your email and ill be more than happy to send you some. I think thats all the big stuff if anyone has any questions on any of the smaller details feel free to PM. This is a 100% complete motor and superchager kit thats ready to drop in, tune and go.
Asking price for everything is $10,000 OBO
Prefered method of payment is paypal
Last edited by ArchAngel2911; 12-16-2011 at 03:36 PM.
#2
#10
Instructor
Member Since: Mar 2011
Location: Denver CO
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
For sale is a complete 408 cubic inch LQ9 Iron motor with D-1SC Procharger with 8-Rib pulley kit. This motor/supercharger combo was recently taken out of a 1998 Corvette and made 760hp/647tq at 10#'s of boost. This motor only has 15,700 miles on it and runs perfectly with zero issues only reason for selling is due to an up coming wedding and I would like to put money into some other projects. This motor is rated to handle 950+ hp and has been so much fun to drive these past years. Here are the specs of the motor and supercharger if anyone has any questions feel free to message me and I will respond as fast as I can. I would also be willing to freight the motor to anywhere in the USA and will add freight charged depending on what it costs me I wont charge a penny more.
Texas Speed 408ci Long Block 10.5/1 CR
Eagle 4" Crank
Eagle 6.124 H-Beam Connecting Rods
Diamond Racing Forged Pistons
ARP Main Studs
PRC Stage 3 72cc Heads
LS7 Lifter Kit
Melling High Volume Oil Pump
ATI Super Damper with pinned crank
East Coast Supercharging Blower Spec Cam
A&A Corvette D-1SC Procharger/Large Single Front Mount Intercooler-Head Unit was inspected less than 1000miles ago and all seals were replaced and given a clean bill of health
A&A Corvette 8-Rib Pulley kit with 10% overdrive balancer
Brand New OEM Water Pump
East Coast Supercharging Power Steering Pump Kit with Fixed Idler
60# Mototron Injectors
High Flow Fuel Rails
LS1 Intake Manifold
LS1 Throttle Body
I'm not exactly sure how to put pictures in the post so if anyone wants pictures send me a pm with your email and ill be more than happy to send you some. I think thats all the big stuff if anyone has any questions on any of the smaller details feel free to PM. This is a 100% complete motor and superchager kit thats ready to drop in, tune and go.
Asking price for everything is $13,000
Prefered method of payment is paypal
Texas Speed 408ci Long Block 10.5/1 CR
Eagle 4" Crank
Eagle 6.124 H-Beam Connecting Rods
Diamond Racing Forged Pistons
ARP Main Studs
PRC Stage 3 72cc Heads
LS7 Lifter Kit
Melling High Volume Oil Pump
ATI Super Damper with pinned crank
East Coast Supercharging Blower Spec Cam
A&A Corvette D-1SC Procharger/Large Single Front Mount Intercooler-Head Unit was inspected less than 1000miles ago and all seals were replaced and given a clean bill of health
A&A Corvette 8-Rib Pulley kit with 10% overdrive balancer
Brand New OEM Water Pump
East Coast Supercharging Power Steering Pump Kit with Fixed Idler
60# Mototron Injectors
High Flow Fuel Rails
LS1 Intake Manifold
LS1 Throttle Body
I'm not exactly sure how to put pictures in the post so if anyone wants pictures send me a pm with your email and ill be more than happy to send you some. I think thats all the big stuff if anyone has any questions on any of the smaller details feel free to PM. This is a 100% complete motor and superchager kit thats ready to drop in, tune and go.
Asking price for everything is $13,000
Prefered method of payment is paypal
im interested in the motor only as well too, any pictures? (abdulrahman.altalal@gmail.com)
#12
Advanced
Thread Starter
Member Since: Oct 2008
Location: Canton Michigan
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Also I wouldn't mind possibly taking a complete motor for trade as well. I'm looking for something close to stock maybe an LS6 or LS2 with some mods and will negotiate price accordingly with a trade.
#17
Instructor
Member Since: Mar 2011
Location: Denver CO
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
For sale is a complete 408 cubic inch LQ9 Iron motor with D-1SC Procharger with 8-Rib pulley kit. This motor/supercharger combo was recently taken out of a 1998 Corvette and made 760hp/647tq at 10#'s of boost. This motor only has 15,700 miles on it and runs perfectly with zero issues only reason for selling is due to an up coming wedding and I would like to put money into some other projects. This motor is rated to handle 950+ hp and has been so much fun to drive these past years. Here are the specs of the motor and supercharger if anyone has any questions feel free to message me and I will respond as fast as I can. I would also be willing to freight the motor to anywhere in the USA and will add freight charged depending on what it costs me I wont charge a penny more.
Texas Speed 408ci Long Block 10.5/1 CR
Eagle 4" Crank
Eagle 6.124 H-Beam Connecting Rods
Diamond Racing Forged Pistons
ARP Main Studs
PRC Stage 3 72cc Heads
LS7 Lifter Kit
Melling High Volume Oil Pump
ATI Super Damper with pinned crank
East Coast Supercharging Blower Spec Cam
A&A Corvette D-1SC Procharger/Large Single Front Mount Intercooler-Head Unit was inspected less than 1000miles ago and all seals were replaced and given a clean bill of health
A&A Corvette 8-Rib Pulley kit with 10% overdrive balancer
Brand New OEM Water Pump
East Coast Supercharging Power Steering Pump Kit with Fixed Idler
60# Mototron Injectors
High Flow Fuel Rails
LS1 Intake Manifold
LS1 Throttle Body
I'm not exactly sure how to put pictures in the post so if anyone wants pictures send me a pm with your email and ill be more than happy to send you some. I think thats all the big stuff if anyone has any questions on any of the smaller details feel free to PM. This is a 100% complete motor and superchager kit thats ready to drop in, tune and go.
Asking price for everything is $10,000 OBO
Prefered method of payment is paypal
Texas Speed 408ci Long Block 10.5/1 CR
Eagle 4" Crank
Eagle 6.124 H-Beam Connecting Rods
Diamond Racing Forged Pistons
ARP Main Studs
PRC Stage 3 72cc Heads
LS7 Lifter Kit
Melling High Volume Oil Pump
ATI Super Damper with pinned crank
East Coast Supercharging Blower Spec Cam
A&A Corvette D-1SC Procharger/Large Single Front Mount Intercooler-Head Unit was inspected less than 1000miles ago and all seals were replaced and given a clean bill of health
A&A Corvette 8-Rib Pulley kit with 10% overdrive balancer
Brand New OEM Water Pump
East Coast Supercharging Power Steering Pump Kit with Fixed Idler
60# Mototron Injectors
High Flow Fuel Rails
LS1 Intake Manifold
LS1 Throttle Body
I'm not exactly sure how to put pictures in the post so if anyone wants pictures send me a pm with your email and ill be more than happy to send you some. I think thats all the big stuff if anyone has any questions on any of the smaller details feel free to PM. This is a 100% complete motor and superchager kit thats ready to drop in, tune and go.
Asking price for everything is $10,000 OBO
Prefered method of payment is paypal
#20
Burning Brakes
Wtt 408 for ls2
Send me a contact # i hv a 06 ls2 with 35,xxx maybe we can work something out. Also send me some pic to Jrversage@aol.com
Last edited by LUV2SPD; 12-20-2011 at 07:09 PM.