A&A Vortech V7 YSi Supercharger kit + Dallas Performance Direct Drive
#1
Tech Contributor
Thread Starter
A&A Vortech V7 YSi Supercharger kit + Dallas Performance Direct Drive
I've seen many kits on here for sale. Not one that I've seen was a complete kit. Many need well over 2000.00 in parts to make them complete. This one will be as complete as the buyer wishes it to be. I have compiled an accurate, detailed list of everything needed to make the kit complete and Frank at A&A is waiting for me to pull the trigger on the order. I'll do that upon finalizing the sale and have it drop shipped directly to the buyer.
This kit is the same as what I run on my car and made 1060RWHP. With my old motor, I've made over 1000RWHP on 5 separate dynos. It can be turned down to make only 550/600 rear wheel horsepower and turned up at a later date. This A&A Vortech V7 YSi kit has the latest bracket with the HD tensioner, the ram air intercooler, the 83lb injector upgrade, the bracket is upgraded to 8-ribs and includes a 2.85" pulley. I have some larger pulley options if you would rather have another size. The kit has ~1000 miles on it and was removed from the car because it got wrecked. I'll be buying the parts directly from A&A and shipping them to the buyer to make it a complete tuner kit.
.
The kit will include the latest silicone hoses between the intercooler and blower. Many members will tell you how much I've helped them with their cars and I will fully support the buyer with the installation of this kit as well. If you have HPtuners, I will help you with a startup tune.
With the direct drive (like the flip drive), you'll only need to purchase the Innovators West 8-rib balancer, which I can get you at a discount if needed.
The direct drive is 100% complete with the same mileage. I will break up the kit only after the blower kit is sold.
I'll post pics as soon as I get more time.
I've sold many high dollar items, many times on here and LS1 Tech without one complaint that wasn't handled to the buyers satisfaction, so you can buy with confidence. References available upon request.
Blower kit with the injector and 8-rib bracket upgrade goes for over 7500.00 shipped.
The direct drive is an additional cost of over 750.00, putting you over 8000.00 for everything.
5950.00 + shipping and Paypal fees. Cashiers check from a known bank is fine or you can stop by a local Chase bank and make a deposit.
My cell# is 972-741-7457
PM, email, text or call me any time.
Bret
This kit is the same as what I run on my car and made 1060RWHP. With my old motor, I've made over 1000RWHP on 5 separate dynos. It can be turned down to make only 550/600 rear wheel horsepower and turned up at a later date. This A&A Vortech V7 YSi kit has the latest bracket with the HD tensioner, the ram air intercooler, the 83lb injector upgrade, the bracket is upgraded to 8-ribs and includes a 2.85" pulley. I have some larger pulley options if you would rather have another size. The kit has ~1000 miles on it and was removed from the car because it got wrecked. I'll be buying the parts directly from A&A and shipping them to the buyer to make it a complete tuner kit.
.
The kit will include the latest silicone hoses between the intercooler and blower. Many members will tell you how much I've helped them with their cars and I will fully support the buyer with the installation of this kit as well. If you have HPtuners, I will help you with a startup tune.
With the direct drive (like the flip drive), you'll only need to purchase the Innovators West 8-rib balancer, which I can get you at a discount if needed.
The direct drive is 100% complete with the same mileage. I will break up the kit only after the blower kit is sold.
I'll post pics as soon as I get more time.
I've sold many high dollar items, many times on here and LS1 Tech without one complaint that wasn't handled to the buyers satisfaction, so you can buy with confidence. References available upon request.
Blower kit with the injector and 8-rib bracket upgrade goes for over 7500.00 shipped.
The direct drive is an additional cost of over 750.00, putting you over 8000.00 for everything.
5950.00 + shipping and Paypal fees. Cashiers check from a known bank is fine or you can stop by a local Chase bank and make a deposit.
My cell# is 972-741-7457
PM, email, text or call me any time.
Bret
Last edited by BLOWNBLUEZ06; 02-18-2012 at 07:25 PM.
#4
Tech Contributor
Thread Starter
#5
ISIS SUCKS FAT CHOAD
I'd be stoked for you bro. Infact if you were going to buy a Newsed kit from anyone other then Andy this one would have my highest approval. I spoke with bret personally about this one and its good to go. Shoot, your not going to find many kits where you can get a direct drive with it as well. its money well spent on this deal. i mean if you were to add it all up it would be over 8K and this is one of those deals that even if it sits on the shelf for a little bit its worth it because you dont find such a complete kit (especially of this calibur) come up for this price too often. In other words, it's worth doing what you have to (with in reason) to pick this up.
Last edited by MVP'S ZO6; 02-14-2012 at 11:21 AM.
#7
Melting Slicks
smokin deal. talk about bad timing.
#8
Burning Brakes
I'd be stoked for you bro. Infact if you were going to buy a Newsed kit from anyone other then Andy this one would have my highest approval. I spoke with bret personally about this one and its good to go. Shoot, your not going to find many kits where you can get a direct drive with it as well. its money well spent on this deal. i mean if you were to add it all up it would be over 8K and this is one of those deals that even if it sits on the shelf for a little bit its worth it because you dont find such a complete kit (especially of this calibur) come up for this price too often. In other words, it's worth doing what you have to (with in reason) to pick this up.
#14
Tech Contributor
Thread Starter
#15
Tech Contributor
Thread Starter
#16
Sorry to hear about the accident I saw some of your build threads and I know you had a lot of your own labor hours in it. Guess I should change my location but I am actually in the DFW area now. If you do still have it next month I would definitely be interested.
#17
Tech Contributor
Thread Starter
I'm assuming you know where Forney is (In Kaufman county, bordering Dallas county on the East side). I'm finishing up an install on one of these kits this week if you'd like to stop by and take a look/ride. I can go over the installation with you if you're doing it yourself. If you have time to wait until I get caught up, I can even install and tune it for you.
#18
Melting Slicks
Thanks, but it wasn't my car that got toasted. Mine's alive and well (thank you Jesus!).
I'm assuming you know where Forney is (In Kaufman county, bordering Dallas county on the East side). I'm finishing up an install on one of these kits this week if you'd like to stop by and take a look/ride. I can go over the installation with you if you're doing it yourself. If you have time to wait until I get caught up, I can even install and tune it for you.
I'm assuming you know where Forney is (In Kaufman county, bordering Dallas county on the East side). I'm finishing up an install on one of these kits this week if you'd like to stop by and take a look/ride. I can go over the installation with you if you're doing it yourself. If you have time to wait until I get caught up, I can even install and tune it for you.
#19
Tech Contributor
Thread Starter