FS: Corvette Bilstein Heavy Duty (Set of 4) : 1997-2013 C5,C6
#1
Burning Brakes
Thread Starter
Member Since: Jul 2004
Location: HESPERIA California
Posts: 884
Likes: 0
Received 0 Likes
on
0 Posts
FS: Corvette Bilstein Heavy Duty (Set of 4) : 1997-2013 C5,C6
Hey all:
I have a used set of Bilstein Heavy Duty (Set of 4) : 1997-2013 C5,C6
I had them on my C5 for about 5,000 miles. They are like new and no problems at all.
NOTE: I just purchased brand new front bushings for the shocks because I misplaced or threw the other ones away. So you will get all brand new front bushings.
I also somehow threw away the washers for the front shocks. I only have 1 washer. So you will need to use your stock washers.
I have been reading on the forums and alot of the guys use the stock hardware kit.
Cost $475 New When I purchaed them.
SOLD...SOLD...SOLD...SOLD...$220
Was $280.00
Corvette Bilstein Gas Shocks are a perfect replacement if your original equipment shocks leave you wanting more from your C5 or C6 suspension. With two models available, Heavy Duty and Sport, you can attain any level performance you desire. Bilstein Heavy Duty Gas Shock are an excellent upgrade for any Base suspension equipped C5 or C6 Corvette and gives you the handling of a factory Z51 suspension with better comfort. The Heavy Duty Bilstein Shock will also work on factory Z51 Corvettes, providing equivalant handling characteristics and improved comfort over factory issue. The Sport model Bilstein Gas Shock is recommended for owners of 1997-2008 Corvettes with factory Z51 suspensions that wish to increase their suspensions performance. The Bilstein Sport Shock will also work on Base suspensions cars for the ultimate in ride and handling and is highly recommended any time an upgrade in Sway Bars has been done.
Both Models of our C5 and C6 Corvette Bilstein Shocks feature a Monotube design, Hard Chromed Piston Rod, One piece Alloy Rod Guide & Seal System, Rising Rate Self-Adjusting Digressive Working Piston and patented Nitrogen Chamber & "Floating" Dividing Piston.
Tech Note: Both shocks will work on F45, Selective Real Time Dampening, equipped 1997-2004 Corvettes but requires the use of our F45 Suspension Simulator Kit, item # 648-053.
Tech Note: Will not fit C6 Z06 models.
Part Numbers:
Fronts are:
F4-BE5-2975-HO
F4-BE5-2975-HO
Rears are:
F4-BE5-2976-HO
F4-BE5-2976-HO
NOTE: I just purchased brand new front bushings for the shocks because I misplaced or threw the other ones away. So you will get all brand new front bushings.
I have a used set of Bilstein Heavy Duty (Set of 4) : 1997-2013 C5,C6
I had them on my C5 for about 5,000 miles. They are like new and no problems at all.
NOTE: I just purchased brand new front bushings for the shocks because I misplaced or threw the other ones away. So you will get all brand new front bushings.
I also somehow threw away the washers for the front shocks. I only have 1 washer. So you will need to use your stock washers.
I have been reading on the forums and alot of the guys use the stock hardware kit.
Cost $475 New When I purchaed them.
SOLD...SOLD...SOLD...SOLD...$220
Was $280.00
Corvette Bilstein Gas Shocks are a perfect replacement if your original equipment shocks leave you wanting more from your C5 or C6 suspension. With two models available, Heavy Duty and Sport, you can attain any level performance you desire. Bilstein Heavy Duty Gas Shock are an excellent upgrade for any Base suspension equipped C5 or C6 Corvette and gives you the handling of a factory Z51 suspension with better comfort. The Heavy Duty Bilstein Shock will also work on factory Z51 Corvettes, providing equivalant handling characteristics and improved comfort over factory issue. The Sport model Bilstein Gas Shock is recommended for owners of 1997-2008 Corvettes with factory Z51 suspensions that wish to increase their suspensions performance. The Bilstein Sport Shock will also work on Base suspensions cars for the ultimate in ride and handling and is highly recommended any time an upgrade in Sway Bars has been done.
Both Models of our C5 and C6 Corvette Bilstein Shocks feature a Monotube design, Hard Chromed Piston Rod, One piece Alloy Rod Guide & Seal System, Rising Rate Self-Adjusting Digressive Working Piston and patented Nitrogen Chamber & "Floating" Dividing Piston.
Tech Note: Both shocks will work on F45, Selective Real Time Dampening, equipped 1997-2004 Corvettes but requires the use of our F45 Suspension Simulator Kit, item # 648-053.
Tech Note: Will not fit C6 Z06 models.
Part Numbers:
Fronts are:
F4-BE5-2975-HO
F4-BE5-2975-HO
Rears are:
F4-BE5-2976-HO
F4-BE5-2976-HO
NOTE: I just purchased brand new front bushings for the shocks because I misplaced or threw the other ones away. So you will get all brand new front bushings.
Last edited by 1 BLOWN V8; 07-13-2013 at 12:10 AM.
#4
Burning Brakes
Thread Starter
Member Since: Jul 2004
Location: HESPERIA California
Posts: 884
Likes: 0
Received 0 Likes
on
0 Posts
ttt.... Lower price due to missing front washers. Can use your stock ones.
$240.00 Shipped
$240.00 Shipped
Last edited by 1 BLOWN V8; 07-10-2013 at 04:26 AM.
#6
Burning Brakes
Thread Starter
Member Since: Jul 2004
Location: HESPERIA California
Posts: 884
Likes: 0
Received 0 Likes
on
0 Posts
#8
Burning Brakes
Thread Starter
Member Since: Jul 2004
Location: HESPERIA California
Posts: 884
Likes: 0
Received 0 Likes
on
0 Posts
#10
Burning Brakes
Thread Starter
Member Since: Jul 2004
Location: HESPERIA California
Posts: 884
Likes: 0
Received 0 Likes
on
0 Posts