ommyt68

looking for a set of long tube headers that are american made for a descent price i used xspower and have nothing with problems with the #6 cylynder port leaking due to manufacture defect unfortunately i have no recvorse i bought them from another forum member .at this point im done trying to make these chinese headers work can anyone help!!!!!

85corvettec4

just bought new xs dont tell me this from what i have learned kooks are the best quality for the lowest price. hovering around 900 new. so used could be 500-700

ommyt68

I'm sure yours will be fine I just believe that at one point the manufacturer had an issue and I'm sure it has been corrected my prob is I bought from another forum member instead of new. So I have no recourse and there's no way to contact the company directly so with that said without a receipt from a legit company who sells them I have noway of getting the right side replaced I've tried modifying them to make them wrk by sending them to a reputable header co. And after several attempts to add metal to raise #6 cyclnder on the flange just isn't cutting it unfortunately the company who makes them are Chinese I've tried multiple times to contact them to no avail so now I just have to eat it and buy new

ommyt68

Thanks but I need 1 3/4

mxw1

I have a pair of Kook's SS. headers and X-pipe I'm selling for a friend.
They were on his 2003 Z06, for less than 14K miles. These headers do have the little tube for EGR/ Emission, one on each bank.
I didn't realize they made 2 different sizes of primary pipes, I can check which Diameter they are if it makes a difference.

The X-pipe also come in two different sizes; a 2-1/2" outlet for stock mufflers or 3" for aftermarket mufflers. They do have the pair of "Cats" near the collector; making them 49 state legal.

I'm willing to let them go for $550 each.

Please e-mail me for fastest responce;
woloshansky@verizon.net

Thanks,

Mike

bada

You can probably have a machine shop, mill the header flange. If thats where the leak is. I have done that in the past, and had good luck fixing the problem.

a/c man

I have a set of LG pros (coated) on my car now I may sell you and go bigger mine are 1 3/4 3'' mid pipe no cats but you can add some.

ommyt68

How much ?

a/c man

$1000 the coating was $400 .o

ommyt68

im trying to spend as litttle as possible ive got to much tied up in it now im gonna take it off next week and take it to a machine shop and had milled flat it seems to be the only solution unless i find some one dumping a set cheap than maybe i could get them but it looks like mill time

85corvettec4

im a machinist and its VERY VERY simple so any shop or someone with a bridgeport in the garage/shop could do it for ya. doubt itd cost very much either. prob $20 maybe even free as a good deed

BLWN1

I have some but unsure of brand. 225 email for pics

Copeters@hotmail.com