Ls1 and lq9 parts
#1
Ls1 and lq9 parts
NEED CASH... Current drivetrain and valve train took a dump so I have to get that back on the road…
Parts located in Seattle area
Have almost an entire long block here..
All prices are less shipping, so buyer will need to cover that.. I would rather stay local as much as possible though
Will also group items together for a better deal..(or if the larger items are purchased might throw in the smaller ones) and some of the prices are just complete guesses.. so hit me up with any offer..
The LS1 items had 10x,xxx on the clock when I pulled them for my new build but they could have been replaced anytime as I have only had the car for a couple years.. The car ran good minus the issue I had with the pistons..
I could not tell you mileage for the LQ9 items
PM or text 5125851891
I also have a factory LS1 cam not pictured for sale $75
LS1 Balancer drilled for pin also have matching crank below.. I will need to find the pin though..$20
Engine block lq9 told it was bored to 4.055 by SAM in Houston. Its just waiting for the final pistons to finish hone.. Possibly 4.060 $500
LS1 Heads 806 casting perimeter bolt $100
LS1 Perimeter bolt valve covers $30
LS1 C5 Engine mounts $15
LS1 Pistons and rods 3 had hairline cracks around the ringlands $100
LQ9 Valve springs and retainers.. I believe there is one or two retainers missing $15
LQ9 Cam plate $10
Cam gears one ls1 and one lq9 $10 each
Arp head bolts $150
Two sets of lifters one set ls1 and one lq9 $50 ea
Ls1 valley cover $15
C5 clutch master $25
Ls1 rockers and pedestals $50
Ls1 pushrods $25
Two 12552216 casting number cranks one LQ9 and one LS1 the LS1 crank is drilled for pin also have matching balancer above.. I will need to find the pin though $150 each
Parts located in Seattle area
Have almost an entire long block here..
All prices are less shipping, so buyer will need to cover that.. I would rather stay local as much as possible though
Will also group items together for a better deal..(or if the larger items are purchased might throw in the smaller ones) and some of the prices are just complete guesses.. so hit me up with any offer..
The LS1 items had 10x,xxx on the clock when I pulled them for my new build but they could have been replaced anytime as I have only had the car for a couple years.. The car ran good minus the issue I had with the pistons..
I could not tell you mileage for the LQ9 items
PM or text 5125851891
I also have a factory LS1 cam not pictured for sale $75
LS1 Balancer drilled for pin also have matching crank below.. I will need to find the pin though..$20
Engine block lq9 told it was bored to 4.055 by SAM in Houston. Its just waiting for the final pistons to finish hone.. Possibly 4.060 $500
LS1 Heads 806 casting perimeter bolt $100
LS1 Perimeter bolt valve covers $30
LS1 C5 Engine mounts $15
LS1 Pistons and rods 3 had hairline cracks around the ringlands $100
LQ9 Valve springs and retainers.. I believe there is one or two retainers missing $15
LQ9 Cam plate $10
Cam gears one ls1 and one lq9 $10 each
Arp head bolts $150
Two sets of lifters one set ls1 and one lq9 $50 ea
Ls1 valley cover $15
C5 clutch master $25
Ls1 rockers and pedestals $50
Ls1 pushrods $25
Two 12552216 casting number cranks one LQ9 and one LS1 the LS1 crank is drilled for pin also have matching balancer above.. I will need to find the pin though $150 each
Last edited by tuckin22; 09-07-2014 at 12:28 AM.