WTB: c5 widened rear fender liner extensions!
#1
Heel & Toe
Thread Starter
c5 widened rear fender liner extensions!
installing TPE rear fenders , I need a solution for inner fender liner gap. Anyone make or sell extensions or another solution for this problem?
#2
I spoke with one member that trimmed a section from a used inner to fill the gap. I may go that route.
#3
Drifting
Liner extensions
Both TPE and L5 use to include these. They are simply strips of ABS plastic. You can find it at most plastic shops or on EBay. You'll need 2 strips 1/8 inch thick by 6" wide and 40" in length. Make a cardboard template then transfer the shape to the ABS and cut it out. A good set of scissors does the trick. The extensions are then pop riveted into place on both ends. When looking at where they go, you will see the shape they need to be. They are wide on both ends with a narrower strip in the center. There use to be a template floating around on here but I couldn't find it. Good luck and enjoy the ride !
Cheers,
MAD Matt
Cheers,
MAD Matt
Last edited by MAD Matt; 08-17-2018 at 07:09 PM.