FS: $100.00 takes all, BUT, you take one piece you take all.
#1
Heel & Toe
Thread Starter
$100.00 takes all, BUT, you take one piece you take all.
All of these parts are off of a 2004 Corvette Coupe with a 5.7 litre Engine and Automatic Transmission with the exception of one article which says C-6 2008 and I don't know what that part is. I traded the car off about 5 years ago but there is a picture of it in my profile album if it matters to anyone. And just like it is stated if you take one thing you take it all. I have tried to sell some of the stuff individually and no one seems to want any of it. I now have a 2019 Corvette Grandsport and a 2017 Fiat Pop 500 both squeezed into my garage and I want this stuff out of my garage. The things are all good but I do see some cut hoses on some of the Cold Air Induction. All of these parts are stock except for the ProTorque 2400 Stall Converter. Now, I will not take PayPal, and I will not ship any of this stuff. Cash, Personal Check, Cashiers Check is fine. You must bring a Pickup Truck or a Trailer because the hood is in a box that if I remember right is 68" by 66" by 10" and it will not lay down flat even in a pickup truck.
1 Torch Red hood in very good condition. Detail info in an old thread dated 10-21-2018
1 Complete 2.73:1 Rear End Assembly. Detailed info in an old thread dated 10-27-2018
1 Stock Torque Converter. Detailed info in an old thread dated 11-4-2018
1 ProTorque 2400 Stall Converter. Detailed info in an old thread dated 11-19-2018
1 Custom Bra which encases the flip up headlights of the 2004 Corvettes
2 exhaust manifolds. The right side one, all three studs for the exhaust pipe mounting are bad.
1 used stock oil pump
looks like a full set of used stock push rods and valve springs
1 used stock camshaft
1 Torch Red Front License Plate Cover, (NOT FILLER) but a clear plastic cover with a torch red frame
And all of the smaller parts that are in the following pictures.
1 Torch Red hood in very good condition. Detail info in an old thread dated 10-21-2018
1 Complete 2.73:1 Rear End Assembly. Detailed info in an old thread dated 10-27-2018
1 Stock Torque Converter. Detailed info in an old thread dated 11-4-2018
1 ProTorque 2400 Stall Converter. Detailed info in an old thread dated 11-19-2018
1 Custom Bra which encases the flip up headlights of the 2004 Corvettes
2 exhaust manifolds. The right side one, all three studs for the exhaust pipe mounting are bad.
1 used stock oil pump
looks like a full set of used stock push rods and valve springs
1 used stock camshaft
1 Torch Red Front License Plate Cover, (NOT FILLER) but a clear plastic cover with a torch red frame
And all of the smaller parts that are in the following pictures.
#8
Heel & Toe
Thread Starter
All of the parts are gone and I will try to get an administrator to close this Thread. Thank Everyone for looking and especially the great guy who took all of the parts.
Thanks Guys
Richcrawf
Thanks Guys
Richcrawf
#9
Team Owner
Member Since: May 2001
Location: Virginia
Posts: 24,998
Received 1,227 Likes
on
874 Posts
St. Jude Donor '11