FAST LSX 90mm Install
Thread Starter
Instructor
Joined: Dec 2002
Posts: 183
Likes: 0
From: Shelby Twp MI
FAST LSX 90mm Install
I have an 01 C5 that I'm installing a FAST LSX 90 and Nick Williams TB on. Does anyone have some pics of the installation process especially the vent line that ran back
to the passenger side valve cover. Nick said I need to install the rubber grommet in the airbridge, insert the hose adapter, and then run a new line from that back to the valve cover. Again, does anyone have some pics of this procedure.
Thanks,
KJ
to the passenger side valve cover. Nick said I need to install the rubber grommet in the airbridge, insert the hose adapter, and then run a new line from that back to the valve cover. Again, does anyone have some pics of this procedure.
Thanks,
KJ
Safety Car
Joined: Jan 2001
Posts: 4,996
Likes: 504
From: Hilton NY
I'm interested in this also. I used the stock intake bolts and could just get the torque wrench on all of them, also the old stainless steel ground strap for the fuel rail didn't fit the new intake so a new one was made using wire and two crimp connectors.
