Streetable Cam w/ ETP 215 heads
#1
Pro
Thread Starter
Member Since: Jan 2006
Location: Rochester NY
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
Streetable Cam w/ ETP 215 heads
I am wondering which cam I can combo up with these heads to make significant power, yet still be streetable for everyday driving. I have a 2000 coupe w/ Dynatech Supermaxx LT system, LS6 intake, vararam, and bullet cat back...
Thanks
Nick
Thanks
Nick
#5
Race Director
Ask the advice of whoever is going to do the tune after install. Tuning for a cam makes a huge difference in drivability. Go with a cam that they know they can make reach your goals. Good cam with a bad tune will drive like crap.
#7
Burning Brakes
Originally Posted by Ed Curtis
Yup...
Craig or Greg can get you into something...
Ed
Craig or Greg can get you into something...
Ed
Chad
#8
Pro
Thread Starter
Member Since: Jan 2006
Location: Rochester NY
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ed Curtis
Yup...
Craig or Greg can get you into something...
Ed
Craig or Greg can get you into something...
Ed
Nick
#9
Melting Slicks
Originally Posted by nikolai
I am wondering which cam I can combo up with these heads to make significant power, yet still be streetable for everyday driving. I have a 2000 coupe w/ Dynatech Supermaxx LT system, LS6 intake, vararam, and bullet cat back...
Thanks
Nick
Thanks
Nick
#10
Advanced
Member Since: Jul 2004
Location: Working in the shop 24/7 HI
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 97 SC Cobra
What's up ED? Nice to see you around these parts. Pm'd you on Tech about a cam for my Z.
Chad
Chad
Ed
#11
Pro
Thread Starter
Member Since: Jan 2006
Location: Rochester NY
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Scubanme
I know that you have an LS-6, but the most important info when choosing a cam is what tranny do yo have? Are you running an A-4 or a Mn6 and which rearend gearset do you have? If you are running a stall speed if you have an A-4?
#12
Advanced
Member Since: Jul 2004
Location: Working in the shop 24/7 HI
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nikolai
Hey Ed. I am dealing with Mike Frumosa at New Era Performance here in Rochester, NY. They will be getting their custom cam through you for my vehicle. I believe they spoke with you just yesterday (Wednesday) about a cam for my ET application. They should be calling in with which one I want soon!
Nick
Nick
Ed
#13
Pro
Thread Starter
Member Since: Jan 2006
Location: Rochester NY
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ed Curtis
Already spoke to them... Gave Mike some ideas but we're just awaiting the "go" on the heads from this end...
Ed
Ed
Sounds good, thanks!