Question about seat track installation
Thread Starter
Melting Slicks
Joined: Feb 2001
Posts: 2,156
Likes: 12
From: Farnham Virginia
Question about seat track installation
I just bought a drivers side power seat track for my FRC. After removing the seat from the car, is it simply a matter of removing the four bolts on the old track and installing the new one? I realize that the electrical connections have to be swapped. I don't have to remove anything on the seat bottom do I? Thanks.
Pro
Joined: Sep 2000
Posts: 703
Likes: 0
From: Cowtown
Originally Posted by Hrdtop00
I just bought a drivers side power seat track for my FRC. After removing the seat from the car, is it simply a matter of removing the four bolts on the old track and installing the new one? I realize that the electrical connections have to be swapped. I don't have to remove anything on the seat bottom do I? Thanks.
Race Director
Joined: Nov 2001
Posts: 18,682
Likes: 4
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12
You will need the wiring harness for the passenger side that goes from the BCM footwell up to the rear for antenna (verts) and CD changer (coupes) and has power seat harness control attached to it. I was thinking about doing the same thing to my FRC and bought original harness from a Vert.
