When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Howdy! Just bought a 2003 ZO6 and starting to work off the codes. I found a severed cable for the RF wheel speed sensor. I see the other end terminated into the EBCM (dk green/tan) but I really want to know where it joins the EBCM harness? It seems it should route forward towards the radiator but I can’t find the other end of the cut. I can trace it from the EBCM back to below the fuse block then it gets lost. Just want to understand the circuit before I splice haphazardly. Thanks!
08-15-2022, 10:19 PM
RF Wheel Speed Sensor Wire Routing
