Service Manual (paper) correction
Thread Starter
Race Director
Joined: Nov 2000
Posts: 10,340
Likes: 664
From: Beverly Hills (Pine Ridge) Florida
Service Manual (paper) correction
Purchased new paper Service Manual 3 vol. set recently, and have found a couple of errors. If you have a set of these, you might want to correct them.
Both the I/P Fuse Block (page 8-117) and the Underhood Fuse Block (page 8-126) show incorrect positioning of the C2 and C3 connectors. At least they are incorrect as to how they are installed on my 2003 Vert.
Correct layout for both pages is C1 on left, C2 in the middle, and C3 on the right.
Plasticman
Both the I/P Fuse Block (page 8-117) and the Underhood Fuse Block (page 8-126) show incorrect positioning of the C2 and C3 connectors. At least they are incorrect as to how they are installed on my 2003 Vert.
Correct layout for both pages is C1 on left, C2 in the middle, and C3 on the right.
Plasticman
Team Owner
Joined: May 2001
Posts: 36,836
Likes: 244
From: Dear Karma, I have a list of people you missed.
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16
You have a looong way to go in correcting the errors in these manuals. I have found many over the last few years.
I think Helm publishing must have hired some ACORN volunteers to proof-read these things.
I think Helm publishing must have hired some ACORN volunteers to proof-read these things.
