installing gauges
Thread Starter
Drifting
Joined: Feb 2009
Posts: 1,408
Likes: 0
From: Hoffman Estates Illinois
installing gauges
hey all i want to install gauges in my car and i was just wondering how difficult this is..im not sure what gauges to put in since everything pretty much shows on the tach computer but im planning A/F ratio and i dont know what else..its mostly for show..but any tech tips suggestions from anyone would be awesome..mostly concerned how difficult it is to run the wires through and install 
Former Vendor
Joined: Oct 2004
Posts: 2,592
Likes: 0
From: FI Performance : Norwalk Connecticut www.FIPERFORMANCE.com
Not hard at all actually. I can get you into the AEM Uego which has everything you need. All you would have to do is drill about a 1" hole through the firewall near driver footwell, +/- power hooks ups and cut/weld the bung in for the 02 sensor. If your rear 02's are off, you can use that mount for the sensor.
http://www.fiperformance.com/aem%20uego.htm
Brian
http://www.fiperformance.com/aem%20uego.htm
Brian
