Broke active handling wires during cam install. Where do they go?
#1
Advanced
Thread Starter
Broke active handling wires during cam install. Where do they go?
Moved the steering rack and didn't see the wires. They are broke about 8 inches off the rack. I can't track where they went into and I had no luck searching for a schematic. Any help is greatly appreciated!!
#3
Advanced
Thread Starter
2 wires. One black and one red. They are coming directly off of the steering rack. I think it's called the direction control? Thank you for the schematic. I'll post a pic when I get home on the pc!
#4
Tech Contributor
It's called magnasteer......and if you tore the wires off the rack, you'll be replacing it. If you just tore off the connector...you may be able to repair.
#6
Advanced
Thread Starter
Sorry Lucky! It's not my car but I should have added info in original post. Car is a 04 Z06.
Here are the wires I broke off the rack.
I ASSUME this is the connector the wires go into?
The magnasteer connector is in the same harness as the fan connectors correct? I just need to know which slot(A/B)the red and black wire go back into the connector.
Here are the wires I broke off the rack.
I ASSUME this is the connector the wires go into?
The magnasteer connector is in the same harness as the fan connectors correct? I just need to know which slot(A/B)the red and black wire go back into the connector.