cam and longtube headers
05-01-2011, 02:29 PM
#1
1st Gear
Thread Starter
Member Since: May 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
cam and longtube headers
Hi corvette owners Im hoping somebody can please help me. I put a thunder racing cam in my 03 Zo6 and kooks longtubes with their off road xpipe. I bought a HP tuner to tune it but I cant get it to run. It fires up for a couple of seconds and shuts off. Its not throwing any codes I erased my cats,air pump,smog, and rear O2s with the tuner. All my sensors and wires are plugged in.
05-01-2011, 03:38 PM
#2
Pro
Member Since: Dec 2003
Location: chandler az
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
You are probably better off writing in to the HPTuner forum to get specifics on where to start with the tuning, but I don't think it's a tuning issue at this point. My car started up and idled with no tune on a heads, cam and injector swap. The cam I'm running is 228/228 588/588 so nothing real radical, but enough to screw up the stock tune.
