LS7 & LS6 CLUTCH SALE +++ ALL CLUTCH ACCESSORIES SALE..INSTOCK ready to Ship Today!!!
#1
Former Vendor
Thread Starter
LS7 & LS6 CLUTCH SALE +++ ALL CLUTCH ACCESSORIES SALE..INSTOCK ready to Ship Today!!!
Hey guys,
We just received a BIG shipment of 50 Brand New LS7 Clutch Kits, they are instock ready to ship the same day you order...We also have all the accessories to do a complete/correct clutch install in your car...
WE Have IT ALL INstock at ALL time, SAME Day Shipping!!!
Eastcoast Performance is your ONE STOP SHOP!!!
LS7 Clutch Kit ....$429.99 w/accessories purchase
Includeds Flywheel, Disc, Pressure Plate & Alignment Tool...
LS6 Clutch Kit $389.99 w/accessories purchase
Includeds Flywheel, Disc, Pressure Plate & Alignment Tool...
Extra Special Deals on What you need...!!!
Please note:: Our New Clutch Bleeder kits are specificly made for Corvettes...
WE HAVE THE BEST REMOTE CLUTCH SPEED-BLEEDERS ON THE MARKET!! **Made in the USA!!!
ECPC's NEW C5 Corvette Remote Clutch (one-man) SPEED-Bleeder Kit $59.99 w/Clutch Purchase
A 40" Stainless Braided Clear Teflon Coated Line!!
ECPC's NEW C6 Corvette Remote Clutch (one-man) SPEED-Bleeder Kit $69.99 w/Clutch Purchase
A 40" Stainless Braided Clear Teflon Coated Line!!
ECPC's Remote Clutch Bleeder Protector $29.99 w/Bleeder Kit Purchase
2000 deg Thermo Heat Sleeve for your Bleeder Line
ARP Flywheel & Pressure Plate Bolts Both $59.99 w/Clutch Purchase
GM Flywheel & Pressure Plate Bolts $26.99 w/Clutch Purchase
Clutch Accessories Specials w/clutch purchase....
GM Updated 2012 C5 Z06 Updated Clutch Slave Unit $99.99
GM Updated 2012 C5 Z06 Updated Clutch Master $89.99
GM C5 Z06 HD Throw-out Bearing $39.99
GM C5 Z06 HD Pilot Bearing $14.99
GM GM Updated 2012 C6 Z06 Clutch Slave $199.99
GM GM Updated 2012 C6 Z06 Clutch Master $119.99
GM C6 LS2,3,7 HD Pilot Bearing $21.99
High-Performance Clutch Fluids
GM DOT4 Clutch & Brake Fluid 8.45oz(250ml) $12.99
Motul RBF600 Clutch & Brake Fluid 16.90oz(500ml) $21.99
TORQUE TUBE ACCESSORIES...
Torque Tube Bearing Kit-Includes(3 Bearings & Dust Shield) $199.99
10mm Input/Output Prop-Shaft Harden Coupler Bolts $7.99each
12mm Input/Output Prop-Shaft Harden Coupler Bolts $8.99each
PLEASE MAKE SURE, & DONT BUY ANY So Called BMW OR EBAY COUPLERS, I GUARENTEE THEY ARE MADE IN CHINA or Taiwan!!!
CORVETTE GUYS, DONT FORGET the couplers!!!
Rubber Torque Tube Couplers
(the good ones, Our units have "Made In GERMANY" casted in the Rubber) German 10mm Rubber Couplers $99.99
(the good ones, Our units have "Made In GERMANY" casted in the Rubber) German 12mm Rubber Couplers $99.99
CARBON FIBER DRIVE SHAFTS on Special $999.99
Billet Aluminum Torque Tube Couplers
ECPC Billet Aluminum Balanced 10mm Couplers $125.99 each
ECPC Billet Aluminum Balanced 12mm Couplers $139.99 each
We sell Mantic, RPS, ACT & our LS9zr6 and of course OEM LS6 & LS7 clutches...Eastcoast Performance-Corvettes is a FULL Service Shop...We average shipping over 350 clutches per year & Install another 100...
Call Mike Yeager to place your order Mon-Sat 9am-7pm est...Sun 1pm-6pm est...1-864-404-1776...
Thanks for your interest..
We accept Visa, MC, Disc, Cashier Check, Direct Deposit & Paypal..!!!
Last edited by Mike Yeager@Eastcoast Performance; 06-25-2013 at 08:08 AM.
#2
Mike -
Got my Z06 clutch, all new hydraulics and remote bleeder installed in the 2000 convertible yesterday. Job went very smooth. Only difficulty was getting the hydraulic line connector apart - found that a thin 17mm open end wrench was the solution. Did it all on jackstands in my garage.
Thanks for the great deal and prompt shipping.
Jerry
Got my Z06 clutch, all new hydraulics and remote bleeder installed in the 2000 convertible yesterday. Job went very smooth. Only difficulty was getting the hydraulic line connector apart - found that a thin 17mm open end wrench was the solution. Did it all on jackstands in my garage.
Thanks for the great deal and prompt shipping.
Jerry
#4
Former Vendor
Thread Starter
Mike -
Got my Z06 clutch, all new hydraulics and remote bleeder installed in the 2000 convertible yesterday. Job went very smooth. Only difficulty was getting the hydraulic line connector apart - found that a thin 17mm open end wrench was the solution. Did it all on jackstands in my garage.
Thanks for the great deal and prompt shipping.
Jerry
Got my Z06 clutch, all new hydraulics and remote bleeder installed in the 2000 convertible yesterday. Job went very smooth. Only difficulty was getting the hydraulic line connector apart - found that a thin 17mm open end wrench was the solution. Did it all on jackstands in my garage.
Thanks for the great deal and prompt shipping.
Jerry
FYI to everyone, we decided to have made for us a little plastic tool that will make getting the quick disconnect apart VERY SIMPLE for anyone, inquire when placing your order..
Answered...thanks
#5
Former Vendor
Thread Starter
Hello,
We have received another Big Shippment of 50 LS7 Clutch Kits & 20 LS6 Clutch Kits...
So ALL these specials above are back on again!!!!
We have received another Big Shippment of 50 LS7 Clutch Kits & 20 LS6 Clutch Kits...
So ALL these specials above are back on again!!!!
#7
Former Vendor
Thread Starter
Thanks for all the orders, we are extending all of these Specials !!!
NO PM's PLEASE!!!
Best & Quickest way is to contact me is directly by phone (Mike Yeager @ 1-864-404-1776)
NO PM's PLEASE!!!
Best & Quickest way is to contact me is directly by phone (Mike Yeager @ 1-864-404-1776)
#8
Eastcoast Performance - Mike Awesome!
I'm a new vette owner, my clutch went out on my c5 I'm shopping for a new clutch. I read the forums researching what clutch to buy not having a clue. I finally got in touch with Mike about my problem and what I thought I needed. Well the first five minutes didn't go well basically because I didn't know what the hell he was talking about. So my reset myself and LISTENED. Mike talked to me about 2 hrs I was like man if I listened to all I would not be a new bee any more. Anyway I reach on faith and order Everything he suggested and it wasnt cheap but I did it. The unknown was my drive couplers/bearings and condition, he urged me to get these couplers and bearings well anything was out. My mechanic called me out to the after he diassembled the drive tube and discovered the rattling I was hearing inside the car. As Mike suspected the drive tube bearings we dissolved inside the tube (metal shavings ). This saved my .......otherwise I would dropping the drive train all over again. Mike is great guy to talk too and has a good heart. I appreciate ya man! ---Mickey
Last edited by mickfree; 05-13-2014 at 11:31 PM.
#9
Melting Slicks
Member Since: Sep 2011
Location: The beautiful Alabama Gulf Coast!!
Posts: 3,497
Received 680 Likes
on
570 Posts
I got my LS7 clutch, flywheel, pressure plate along with master & slave cylinders, pilot bearing, throw-out bearing, torque tube bearing kit & couplers, and a clutch speed bleeder from Mike back in November. I've never had better service. Mike took the time to explain everything in detail and suggest what I needed without any pressure tactics whatsoever. Excellent vendor!
#10
Race Director
I got my LS7 clutch, flywheel, pressure plate along with master & slave cylinders, pilot bearing, throw-out bearing, torque tube bearing kit & couplers, and a clutch speed bleeder from Mike back in November. I've never had better service. Mike took the time to explain everything in detail and suggest what I needed without any pressure tactics whatsoever. Excellent vendor!
we're curious if this place is still doing deals