Mass Airflow Sensor (MAF) - How to clean video
#1
Drifting
Thread Starter
Member Since: Nov 2016
Location: East Metro (Twin Cities) Minnesota
Posts: 1,992
Received 1,248 Likes
on
546 Posts
St. Jude Donor '21
Mass Airflow Sensor (MAF) - How to clean video
I do this every couple of years as a maintenance item and thought I would do a quick video how to. Easy as pie
The following users liked this post:
ArmchairArchitect (06-08-2017)
#2
Nice vid. Just did this myself. Noticeable improvement!
#8
Drifting
Thread Starter
Member Since: Nov 2016
Location: East Metro (Twin Cities) Minnesota
Posts: 1,992
Received 1,248 Likes
on
546 Posts
St. Jude Donor '21
I do this every couple of years as a maintenance item and thought I would do a quick video how to. Easy as pie
https://www.youtube.com/watch?v=nm_p8sgRzN8
https://www.youtube.com/watch?v=nm_p8sgRzN8
#9
mike v
Thanks for the great Vid. I do mine with every oil change. Having it apart I also do the throttle body, and clean out the Ducts too.
#10
Melting Slicks
#11
Team Owner
Your video may cause Z06 owners (whose cars came with no screen) to freak out.
Otherwise informative vid.
Otherwise informative vid.
#12
Melting Slicks
I was reading a thread on here earlier from a pretty long time ago where a guy had his 04' Z at the dealer for something and they told him that his maf had been descreened. They said that he needed to have it fixed or it could cause serious damage lol. Apparently they ordered a new one just to find out they didn't come with a screen. The dealership's "corvette specialist" had no idea the 02-04 Z06 didn't come without a screen. Haha
#13
Instructor
This is why this forum is awesome. I learned something new and super informative. I just bought an 02 Z and would have freaked out when there was no screen in my MAF, I never knew they came without a screen.
John
#15
Instructor
When the LS6 came out, GM engineers discussed the removal of the screen. They stated the MAF is used on multiple vehicle platforms, and the screen was required to straighten the airflow on those vehicles where the air filter is offset relative to the intake manifold as on some trucks. They evaluated removing it during the design of the LS6 to wring out every bit of HP, and found it was not needed on the Vette since there is a straight shot of airflow from the air filter into the intake manifold.
#16
Drifting
Thread Starter
Member Since: Nov 2016
Location: East Metro (Twin Cities) Minnesota
Posts: 1,992
Received 1,248 Likes
on
546 Posts
St. Jude Donor '21
I do this every couple of years as a maintenance item and thought I would do a quick video how to. Easy as pie
https://www.youtube.com/watch?v=nm_p8sgRzN8
https://www.youtube.com/watch?v=nm_p8sgRzN8
The following users liked this post:
knewblewkorvette (04-26-2020)