Z06 Brake Duct Template??
#1
Z06 Brake Duct Template??
Getting ready to do the Z06 brake duct conversion on my c5 coupe and I have all the pieces off a donor Z but I don't have a cutting template. I can get one on ebay ( see first pic ) but it doesn't have the measurements to the bottom edge of the door or top of the rocker. When this conversion was available as a kit back a few years ago they had a much better template ( see pic 2 ). Does anyone sell this style template, know of where you can download one or at the very least know the specific measurements of where to place the template in relation to the door and top of the rocker?
#2
Race Director
somebody just gave the link let me find it......info is in this thread to get you started. i want to do this also so take lots of pictures and save the template for me. thanks bob
https://www.corvetteforum.com/forums...ake-ducts.html
https://www.corvetteforum.com/forums...ake-ducts.html
Last edited by bobs77vet; 12-18-2017 at 12:27 PM.
The following users liked this post:
BeauVan (12-18-2017)
#3
Thanks for the link! I was finally able to get one of those links to open. So the files that opened come in two pages that you have to kind of piece together. I re-drew them in Adobe Illustrator so I could print them as one page on an 11x17 sheet. I printed a couple copies so I can do a little tooling if required once I receive the actual vents to triple check for accuracy.
Once I have all the measurements verified I'll work on making some CAD templates for both sides and the fender liners as well with measurements that a person can transfer off onto a poster paper or a heavier sheet stock for a durable template.
I'll be sure to post the process with photos once I have all the materials handy, either to this thread or I'll link to a new build thread
Once I have all the measurements verified I'll work on making some CAD templates for both sides and the fender liners as well with measurements that a person can transfer off onto a poster paper or a heavier sheet stock for a durable template.
I'll be sure to post the process with photos once I have all the materials handy, either to this thread or I'll link to a new build thread
The following users liked this post:
mcm95403 (04-19-2020)
#4
Race Director
Thanks for the link! I was finally able to get one of those links to open. So the files that opened come in two pages that you have to kind of piece together. I re-drew them in Adobe Illustrator so I could print them as one page on an 11x17 sheet. I printed a couple copies so I can do a little tooling if required once I receive the actual vents to triple check for accuracy.
Once I have all the measurements verified I'll work on making some CAD templates for both sides and the fender liners as well with measurements that a person can transfer off onto a poster paper or a heavier sheet stock for a durable template.
I'll be sure to post the process with photos once I have all the materials handy, either to this thread or I'll link to a new build thread
Once I have all the measurements verified I'll work on making some CAD templates for both sides and the fender liners as well with measurements that a person can transfer off onto a poster paper or a heavier sheet stock for a durable template.
I'll be sure to post the process with photos once I have all the materials handy, either to this thread or I'll link to a new build thread
excellent, if your template worked for you can you mail it to Me? thanks Bob
#5
I also have the DropBox link to the Left and Right Side Templates I ended up creating that worked out great for me: https://www.dropbox.com/s/es1vnciv7b...Right.pdf?dl=0
https://www.dropbox.com/s/kvqznxkzto...0Left.pdf?dl=0
-Cheers!
#7
Team Owner
I knew there were some templates floating around here from back in the day...glad to see they are still around
#8
Nice 👍🏼
hey bob, sorry it took so long to get this back to you, i took me longer than i thought to get around to this project. I now have a full thread on my install: https://www.corvetteforum.com/forums...-template.html
i also have the dropbox link to the left and right side templates i ended up creating that worked out great for me: https://www.dropbox.com/s/es1vnciv7b...right.pdf?dl=0
https://www.dropbox.com/s/kvqznxkzto...0left.pdf?dl=0
-cheers!
i also have the dropbox link to the left and right side templates i ended up creating that worked out great for me: https://www.dropbox.com/s/es1vnciv7b...right.pdf?dl=0
https://www.dropbox.com/s/kvqznxkzto...0left.pdf?dl=0
-cheers!
The following users liked this post:
mcm95403 (04-19-2020)
#11
8th Gear
Member Since: Oct 2022
Location: Massachusetts
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Diagram
Thanks for the link! I was finally able to get one of those links to open. So the files that opened come in two pages that you have to kind of piece together. I re-drew them in Adobe Illustrator so I could print them as one page on an 11x17 sheet. I printed a couple copies so I can do a little tooling if required once I receive the actual vents to triple check for accuracy.
Once I have all the measurements verified I'll work on making some CAD templates for both sides and the fender liners as well with measurements that a person can transfer off onto a poster paper or a heavier sheet stock for a durable template.
I'll be sure to post the process with photos once I have all the materials handy, either to this thread or I'll link to a new build thread
Once I have all the measurements verified I'll work on making some CAD templates for both sides and the fender liners as well with measurements that a person can transfer off onto a poster paper or a heavier sheet stock for a durable template.
I'll be sure to post the process with photos once I have all the materials handy, either to this thread or I'll link to a new build thread