Shop installed new motor, speedometer does not work now. What could it be?
#1
Le Mans Master
Thread Starter
Member Since: Aug 2001
Location: Savannah GA
Posts: 6,070
Received 280 Likes
on
213 Posts
Cruise-In IV Veteran
Shop installed new motor, speedometer does not work now. What could it be?
Title says it all...
Everything else works but the speedometer. The HUD speedometer reads 0 also.
I figured that the harness on the diff could be unplugged???
Here are some codes thrown. Can anyone tell me what they mean.
PCM P0500 HC
TCS C1234 H
RFA U1096 H
U1064 H
U1016 H
C2120 H
:cheers:
[Modified by C5-VERT, 7:15 AM 10/23/2002]
Everything else works but the speedometer. The HUD speedometer reads 0 also.
I figured that the harness on the diff could be unplugged???
Here are some codes thrown. Can anyone tell me what they mean.
PCM P0500 HC
TCS C1234 H
RFA U1096 H
U1064 H
U1016 H
C2120 H
:cheers:
[Modified by C5-VERT, 7:15 AM 10/23/2002]
#2
Safety Car
Member Since: Aug 2000
Location: Murphy TX
Posts: 4,154
Likes: 0
Received 1 Like
on
1 Post
Cruise-In II Veteran
Re: Shop installed new motor, speedometer does not work now. What could it be? (C5-VERT)
The P0500 is indeed a VSS (vehicle speed sensor) DTC, my guess would also be a poor connection. Pinched leads would be another thing to look for if it is connected properly.
The C1234 is a WSS (wheel speed sensor) DTC, open or short to ground. I haven't looked at the circuits closely but I'd resolve the VSS circuit problem and see if this one goes away.
The rest are nuisance items, the most interesting being the C2120 which is a TPS item, nothing to worry about.
[Modified by ToplessTexan, 6:42 AM 10/23/2002]
The C1234 is a WSS (wheel speed sensor) DTC, open or short to ground. I haven't looked at the circuits closely but I'd resolve the VSS circuit problem and see if this one goes away.
The rest are nuisance items, the most interesting being the C2120 which is a TPS item, nothing to worry about.
[Modified by ToplessTexan, 6:42 AM 10/23/2002]