Ready for better performance
Melting Slicks
Joined: Jun 2001
Posts: 2,743
Likes: 3
From: Davie Florida
Re: Ready for better performance (Ken Reed)
A good hi stall converter(Yank SY3500 or Vig. 2800 for example) will give you the biggest gain in performance on an A4. If it were me I would also install 3.42 gears at the same time and save on labor costs. I would also go with the Donaldson Blackwing air filter. You might also want to consider adding TPIS LT headers and a LS6 intake. With these mods you should be able to run the low 12s with good traction at sea level.
98 A4
Donaldson Blackwing
TPIS Headers
LS6 Intake
Cartek Stage 2 Heads
Cartek Gen. 2 M Cam
ST3500
3.73 Gears
B&M 28,000 Trans. cooler
172 T.Stat
Underdrive Pulley
[Modified by Mitch C, 6:31 PM 11/12/2002]
98 A4
Donaldson Blackwing
TPIS Headers
LS6 Intake
Cartek Stage 2 Heads
Cartek Gen. 2 M Cam
ST3500
3.73 Gears
B&M 28,000 Trans. cooler
172 T.Stat
Underdrive Pulley
[Modified by Mitch C, 6:31 PM 11/12/2002]
What both of them said. Although, i would say the Longtubes and the offroad x-pipe. :D Good Luck! :yesnod: :cheers:
