bolt/nut size for seat mounts
08-26-2003, 02:25 PM
#1
Pro
Thread Starter
Member Since: Aug 2001
Location: Redwood City CA
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
bolt/nut size for seat mounts
I am working on a new seat mount for my racing seat, but havn't been able to figure out what the bolt size is for the OEM seat mounts. I tried 3/8" but it only scews on part way. Is this some funky course thread metric size?
Thanks
Thanks
08-26-2003, 04:58 PM
#2
Tech Contributor
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,076
Received 8,910 Likes
on
5,325 Posts
Re: bolt/nut size for seat mounts (jayleone)
It is definitely metric. Just about every bolt and nut on the C5 is metric.
Bill
Bill
The following users liked this post:
glbeauchamp (04-25-2023)
08-27-2003, 10:45 AM
#3
Racer
Member Since: Nov 2000
Location: Marblehead, Mass, 2003 Corvette Convertible Black/Black/Black
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Re: bolt/nut size for seat mounts (jayleone)
Hello
If the bolt are about 3/8. The correct size in 10mm x 1.5 pitch. You can buy them at a good auto parts store or hareware store. Good luck.
If the bolt are about 3/8. The correct size in 10mm x 1.5 pitch. You can buy them at a good auto parts store or hareware store. Good luck.
08-28-2003, 09:49 AM
#4
Tech Contributor
Re: bolt/nut size for seat mounts (BLACK86)
The correct size in 10mm x 1.5 pitch
:cheers:
