FINALLY!! Andy gets a motor for himself!!! And it's a wild one.
#1
Platinum Supporting Vendor
Thread Starter
FINALLY!! Andy gets a motor for himself!!! And it's a wild one.
I blew the motor in my car just about a year ago. I had the dealer install a new 03 LS6 under warranty last November. I immediately took it out and sold it with the intention of building a forged motor. Well, we all know how busy I've been with other peoples cars, that mine has been continually put on the back burner. I have built 8 forged 348 motors and sold them all before they ever saw my engine bay.
Then my intention was to put in my 427 C5R block as soon as I had time. I built a 409 aluminum sleeved block and was going to sell it to fund the 427 project but decided to put the 409 in instead. The 409 is a block that I had sleeved by Nelson Racing Engines and ,although it looks bullet proof, is untested. I got to thinking that if I sold this one and something happened, I would feel awful. Not to mention a very unhappy customer. So a reversal of sorts. I am going to put the 409 in my car and flog it to death to make sure the sleeving process is sound. I have an awsome set of 6 liter Stage III heads that flowed 328 @.600, a 233-244 cam and a HUGE Vortech blower that I have to make a bracket and pulley system to work with my single air to air intercooler system that I use with my Procharger system. I hope to make 15# boost. Siemens 57# injectors and a couple or 3 fuel pumps should be able to fuel it. It will definately be one of a kind.
In the year my car has been up on jackstands, I've stolen, and sold, the engine, brakes, shocks, sway bars, clutch, fuel pump, blower , injectors, wheels, tires, radiator, AC condensor and lines, about a hundred nuts and bolts and who knows what else. Actually two sets of wheels and tires. I bought a set just to roll the car from the old shop to the new and sold them too!
It's also been sitting outside, uncovered and unwashed for a year. It should be illegal to treat a new Z06 like this. I figure that I've made over $8000 in car payments and who knows how much in insurance payments since the car even had a motor in it. How stupid is that?
The first thing people notice about my shop is the ratty looking Z06 out back and THEN comment on how nice and clean my shop is. Maybe the ratty looking Z06 should be as nice as the shop. It's crazy that I build all these ridiculously fast Corvettes and I drive a Chevy V6 pickup truck. I should have a car that shows what I am capable of. What can I do now? Take them for a ride in my S-10 pickup and tell them " your car will be ten times faster than this" :lol: It's about time I got this thing together.
I have to finish Roy's blown 427 ( it's almost done, Roy) and then I'm going I'm going to take a few days and work on my OWN car. I'm determined to have it on the road before my next car payment!
If the 409 sleeved block holds up under high boost, I'll do some more.
Then my intention was to put in my 427 C5R block as soon as I had time. I built a 409 aluminum sleeved block and was going to sell it to fund the 427 project but decided to put the 409 in instead. The 409 is a block that I had sleeved by Nelson Racing Engines and ,although it looks bullet proof, is untested. I got to thinking that if I sold this one and something happened, I would feel awful. Not to mention a very unhappy customer. So a reversal of sorts. I am going to put the 409 in my car and flog it to death to make sure the sleeving process is sound. I have an awsome set of 6 liter Stage III heads that flowed 328 @.600, a 233-244 cam and a HUGE Vortech blower that I have to make a bracket and pulley system to work with my single air to air intercooler system that I use with my Procharger system. I hope to make 15# boost. Siemens 57# injectors and a couple or 3 fuel pumps should be able to fuel it. It will definately be one of a kind.
In the year my car has been up on jackstands, I've stolen, and sold, the engine, brakes, shocks, sway bars, clutch, fuel pump, blower , injectors, wheels, tires, radiator, AC condensor and lines, about a hundred nuts and bolts and who knows what else. Actually two sets of wheels and tires. I bought a set just to roll the car from the old shop to the new and sold them too!
It's also been sitting outside, uncovered and unwashed for a year. It should be illegal to treat a new Z06 like this. I figure that I've made over $8000 in car payments and who knows how much in insurance payments since the car even had a motor in it. How stupid is that?
The first thing people notice about my shop is the ratty looking Z06 out back and THEN comment on how nice and clean my shop is. Maybe the ratty looking Z06 should be as nice as the shop. It's crazy that I build all these ridiculously fast Corvettes and I drive a Chevy V6 pickup truck. I should have a car that shows what I am capable of. What can I do now? Take them for a ride in my S-10 pickup and tell them " your car will be ten times faster than this" :lol: It's about time I got this thing together.
I have to finish Roy's blown 427 ( it's almost done, Roy) and then I'm going I'm going to take a few days and work on my OWN car. I'm determined to have it on the road before my next car payment!
If the 409 sleeved block holds up under high boost, I'll do some more.
#2
Drifting
Member Since: Feb 2002
Location: san diego ca
Posts: 1,314
Likes: 0
Received 0 Likes
on
0 Posts
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (Andy@AandACorvette)
Andy , your like the Tailor that walks around with holes in his pants :lolg: .
You eat, sleep and breath your customers cars all day and night..So its no surprise that the last thing you want to do when you have a few hours to yourself is work on your own car .
I can't wait to see what your Blown 409 puts down !
They always say that good things come to those who wait :party:
:cheers:
Jeff
You eat, sleep and breath your customers cars all day and night..So its no surprise that the last thing you want to do when you have a few hours to yourself is work on your own car .
I can't wait to see what your Blown 409 puts down !
They always say that good things come to those who wait :party:
:cheers:
Jeff
#3
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (BLUTHUNDER)
Andy , your like the Tailor that walks around with holes in his pants :lolg: .
You eat, sleep and breath your customers cars all day and night..So its no surprise that the last thing you want to do when you have a few hours to yourself is work on your own car .
I can't wait to see what your Blown 409 puts down !
They always say that good things come to those who wait :party:
:cheers:
Jeff
You eat, sleep and breath your customers cars all day and night..So its no surprise that the last thing you want to do when you have a few hours to yourself is work on your own car .
I can't wait to see what your Blown 409 puts down !
They always say that good things come to those who wait :party:
:cheers:
Jeff
#4
Le Mans Master
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (Andy@AandACorvette)
good luck with the project, and as usual, please provide pics and details of the progress and finished product. :) :cheers:
#5
Race Director
Member Since: May 2003
Location: Iowa
Posts: 13,995
Received 2,706 Likes
on
1,668 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16'-'17-‘18-'19-'20-'21-'22-
'23-'24
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (Andy@AandACorvette)
Gee, you are so selfish :smash: :jester
Good luck with the prodject. :cheers:
Good luck with the prodject. :cheers:
#6
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (Andy@AandACorvette)
You honestly made me laugh out loud with this post. :lol: Only a true enthusiast AND a person dedicated to support his customers would be in such a situation - hats off to you. Look forward to following the results of your project - and hope you don't find yourself again with a 'ratty' corvette out back of your shop as your own personal (non-truck) ride.
#7
Melting Slicks
Member Since: Aug 2002
Location: Tacoma WA your Junk Yard Dogg
Posts: 2,103
Likes: 0
Received 0 Likes
on
0 Posts
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (Karl_in_Chicago)
work hard.....time to play hard....good luck on your car Andy :thumbs: :thumbs:
#8
Burning Brakes
Member Since: Oct 2002
Location: Sunny Earthquake Country, USA On the Left Coast (which is becoming more Right!)
Posts: 797
Likes: 0
Received 1 Like
on
1 Post
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (Andy@AandACorvette)
Hey Andy...Take a break, cool it :leaving: , we can wait! Nobody deserves a day (or 3) off more than you! Get your ZO6 movin' and we can oll go to the track together! :steering: :auto:
#9
Team Owner
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (Andy@AandACorvette)
Ita about time you got that car on the road!!! :lol: :jester
VR :cheers:
VR :cheers:
#10
Melting Slicks
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (vetterdstr)
Good luck with your project. :cool: Maybe you can post some before and after pictures. :D
#11
Team Owner
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (Andy@AandACorvette)
:lol: Mechanics always drive the rattiest cars - at least that's always been my experience.
Best of luck. Can't wait to see the results of this one. :cheers: :thumbs:
Best of luck. Can't wait to see the results of this one. :cheers: :thumbs:
#12
CHICAGO CREW !
Member Since: Nov 2001
Location: We are living in a Bazzaro World everything is upside down half ass backwards !
Posts: 17,588
Received 90 Likes
on
63 Posts
CI 4-5-6-7-8-9 Veteran
St. Jude Donor '06-'07-'08 & '12
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (knewblewkorvette)
:crazy: LIFE IS SHORT ANDY NEEDS TO HAVE FUN TOO ! :thumbs: :thumbs:
#13
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (Andy@AandACorvette)
I'm glad you are getting your hot rod on the road again. You deserve to have some fun. BTW, remember I have pics of your sad Z06. :D
#14
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,892
Received 19,284 Likes
on
13,961 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (Andy@AandACorvette)
Best of luck getting your car done. Let us know how it turns out.
#15
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (JDs00PewterCoupe)
Andy, I'm planning on visiting my brother in Chino Hills soon. I volunteer to wash and Zaino your Z06. :thumbs:
#16
Platinum Supporting Vendor
Thread Starter
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (MagRedSkull)
MagRed Skull :I know you were planning on blackmailing me with those photos. Go ahead and post them in this thread. It's a SAD sight!
BTW: This where my engine went last year. In your car! It's all your fault! :D
[Modified by Andy@AandACorvette, 9:04 PM 10/25/2003]
BTW: This where my engine went last year. In your car! It's all your fault! :D
[Modified by Andy@AandACorvette, 9:04 PM 10/25/2003]
#17
Le Mans Master
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (Andy@AandACorvette)
Andy, best of luck on your new project! :cheers: You definitely deserve, to take some time and finish your own project, so that you can enjoy it! My hat's off to you. Please keep us posted.
[Modified by LuvmyC5, 11:10 PM 10/25/2003]
[Modified by LuvmyC5, 11:10 PM 10/25/2003]
#18
Le Mans Master
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (Andy@AandACorvette)
Andy, the "heads and valvetrain" portion of your website is not working properly. It directs to the suprechargers page.
#19
Le Mans Master
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (kumar75150)
Andy...I sent you an email. Good luck on your project :cheers:
Aloha
Bill
Aloha
Bill
#20
Re: FINALLY!! Andy gets a motor for himself!!! And it's a wild one. (Andy@AandACorvette)
Here is a recent picture of Andy's poor Z06. It needs some serious TLC. :cry
[Modified by MagRedSkull, 10:32 AM 10/26/2003]
[Modified by MagRedSkull, 10:32 AM 10/26/2003]