RPI Designs

You guys have been asking for these for a long time. We finally have them finished. As usual our fiberglass products are made right here in the USA!

If you are looking for that C6 ZR1 Corvette look, you can now have the same style front splitter and side skirts package. We made these products to look identical to the C6 ZR1, but to fit your C5 or C5 Z06.

Splitters available here: http://www.rpidesigns.com/shop/item.aspx?itemid=5013
Skirts available here: http://www.rpidesigns.com/shop/item.aspx?itemid=5014
Splitter+SKirts discount package here: http://www.rpidesigns.com/shop/item.aspx?itemid=5015

RPI Designs

Yes, sir. Code is good for any combo.
Thanks

Robert 2000

I like the side skirts. I wouldn't mind seeing more pics on other cars of these.

f6john

How does the front splitter attach?

RPI Designs

These are brand new for C5. These are the only ones on a C5 anywhere.

RPI Designs

It bolts to the lower fascia like our C6 splitters.

RC45

What do the sideskirts weigh? Not shipping weight, but actual weight including fastners as they are mounted.

Thanks.

BWF07

Josh both are great looking items, but can you tell me if the splitter is the same dimensions as the ACI splitter that has been around for some time now. The reason I ask, is I currently have an ACI that I had done in hydrocarbon, but I have scraped it a few times backing out of my drive and the hydrocarbon chips off easily. So if this one adds a little more clearance I might be interested.

RPI Designs

Use C5ZR1 for the discounted price on all pieces, all combos.

RPI Designs

Each skirt is about 1.5 pounds

RPI Designs

I dont know much about the ACI, but that splitter mounts lower, our ZR1 style splitter goes "out" more than down.

RC45

Thanks, do you have better photos of the rear vertical splashguard pieces?

phil hunter

OK, a couple of dumb questions. Will the front splitter fit on an A & A Vortech supercharger equipped car? Second, can the front air dams removed when this is added to the car or are they still necessary?


Phil

vettejeff

Could you show some side shots of splitter at the front of the car. Also what is the measurement from the pavement to the tip of the splitter. Im worried about pulling into the driveway.

glorysends

For your second question, you can remove the air dams, I would assume. I removed mine on my ACI style splitter because it looks like crap when you have the splitter and keep them on. You seem them hanging down and just doesn't look right.

Here's a picture of before and after, sorry. Not trying to hi-jack thread, just showing poster what I am talking about.



This is the best after shot I have.

peter pan

Those really look good

RPI Designs

I will work on this for you. Thanks

RPI Designs

I will work on more pictures for you. The splash guards attach woth screws. On the carbon fiber, we can do carbon or black splash guards.

Thanks!

RPI Designs

RPI Designs

Thank you for the orders!