C5 stock wheels to c6 upgrade
#1
3rd Gear
Thread Starter
Member Since: Jun 2014
Location: Penfield New York
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
C5 stock wheels to c6 upgrade
Looking to upgrade front and rear rims and tires to c6 OEM.
for the rear I heard everything to no shims needed to half inch.
what should I do?
if shims are needed can someone recommend a part number or product name.
thanks
for the rear I heard everything to no shims needed to half inch.
what should I do?
if shims are needed can someone recommend a part number or product name.
thanks
#2
Instructor
Probably didn't need to start another thread....... just sayin... https://www.corvetteforum.com/forums...ded-on-c5.html
I went with these adapters from Amazon:
If I planned on doing anything extreme like drag racing I might have spent more - but these seem fine and got decent reviews. You will need to cut down your wheel studs for the wheel to sit flush against the adapters.
I went with these adapters from Amazon:
If I planned on doing anything extreme like drag racing I might have spent more - but these seem fine and got decent reviews. You will need to cut down your wheel studs for the wheel to sit flush against the adapters.
#4
Burning Brakes
This is with a 1” hub centric spacer running a 305 tire
Last edited by ls1wolf; 03-07-2020 at 10:23 AM.
#5
Le Mans Master
Member Since: Jan 2000
Location: Georgetown TX
Posts: 8,431
Received 1,867 Likes
on
1,083 Posts
C5 of Year Finalist (appearance mods) 2019
That's interesting that some of you are also running a spacer in front, as all the 8.5" width front wheels for C5's, base C6's, and base C7's have the same +56 offset.