[Z06] What did you do to your Z06 TODAY??
#4681
Racer
I ordered a cover for it.
The following users liked this post:
lewislgZ06 (08-13-2021)
#4683
Pro
Member Since: Jan 2016
Posts: 668
Received 249 Likes
on
124 Posts
2021 C5 of the Year Finalist - Modified
Black friday loot:
Trackspec GT1 center louver
Mighty Mouse catch can, C5/C6 WILD setup (-10an line)
AMT Motorsport upper control arm stud kit with shims
AEM X-Series Wideband UEGO AFR Sensor Gauge 30-0300
AC Delco LS2/LS3 oem belt tensioner (taller lips). My belt was getting chewed.
VXDIAG obd2 scanner (on the way)
Trackspec GT1 center louver
Mighty Mouse catch can, C5/C6 WILD setup (-10an line)
AMT Motorsport upper control arm stud kit with shims
AEM X-Series Wideband UEGO AFR Sensor Gauge 30-0300
AC Delco LS2/LS3 oem belt tensioner (taller lips). My belt was getting chewed.
VXDIAG obd2 scanner (on the way)
Last edited by Efx; 12-12-2021 at 08:19 AM.
The following users liked this post:
Tusc (12-11-2021)
#4684
Running Guns & Moonshine
Good loot.
Im waiting on a set of Borg 100af self lube delrin bushings. I had already pressed in another brand's set on the rears unused. The Borg does the rears and the front as well. The car is street dedicated and my intent is to counter any harshness from the delrin with my RideTech coilovers at a softer rebound setting if needed.
As for what I've done to the Z06 today? I finished the internal electrical wiring and hoses for the dual in-tank Walbro 430s. Waiting on one small part later this week because I broke the level sensors, then these are buttoned up and going back on the car.
Im waiting on a set of Borg 100af self lube delrin bushings. I had already pressed in another brand's set on the rears unused. The Borg does the rears and the front as well. The car is street dedicated and my intent is to counter any harshness from the delrin with my RideTech coilovers at a softer rebound setting if needed.
As for what I've done to the Z06 today? I finished the internal electrical wiring and hoses for the dual in-tank Walbro 430s. Waiting on one small part later this week because I broke the level sensors, then these are buttoned up and going back on the car.
#4685
Pro
Member Since: Jan 2016
Posts: 668
Received 249 Likes
on
124 Posts
2021 C5 of the Year Finalist - Modified
Black friday loot:
Trackspec GT1 center louver
Mighty Mouse catch can, C5/C6 WILD setup (-10an line)
AMT Motorsport upper control arm stud kit with shims
AEM X-Series Wideband UEGO AFR Sensor Gauge 30-0300
AC Delco LS2/LS3 oem belt tensioner (taller lips). My belt was getting chewed.
VXDIAG obd2 scanner (on the way)
Trackspec GT1 center louver
Mighty Mouse catch can, C5/C6 WILD setup (-10an line)
AMT Motorsport upper control arm stud kit with shims
AEM X-Series Wideband UEGO AFR Sensor Gauge 30-0300
AC Delco LS2/LS3 oem belt tensioner (taller lips). My belt was getting chewed.
VXDIAG obd2 scanner (on the way)