69cvette

I'm sure this has been asked but I have an ls2 GTO with a custom grind cam and all the supporting valvetrain.

I also just bought a 24k mile C5 Z06..

random question.
would the cam and all valve train stuff from the GTO LS2 fit the LS6 in my C5?

is there anything major to be done if it does work?

227* intake dur at 0.050 and 235* exhaust dur on a 113LSAwith dual springs, titanium retainers, seats, valve stem seals, and hardened chromemoly pushrods Competition Cams LSX rocker arm trunion upgrade.

would the LS6 cam go right into the ls2? would I need to do anything to make it work?

tlove32

The short answer is yes. Might be easier to just swap the heads & cam from the GTO to the Z