yoshgixxer

138mph enough for all but a 9sec pass, them 60's though! Get them in the 1.4-1.5 range and that thing would be an animal. How much spray your putting on top 150?

FourG63 97GST

yea so I've heard, that was the first time I took that setup to the track, since it's 95% street car, on 18s, 6speed, coilovers, on nitrous. I accepted that science wasn't on my side, and never invested time to make it 60.
that was around 160-170, with a NANO system behind it. the NANO shined on the backside. it trapped 138 no matter how bad i mess up the 1/8

Street Approved

street sweeper cam from FTI is pretty legit to. Dare is say, the best dam cam. If your not set on a cam yet.

Street Approved

This was the list I created for when I woke up and said, "ill just slap a cam in"

bought the street sweeper cam custom grind to 233/234

then I was like, damnit I need supporting mods and if i take out all these parts..i might as well replace them right? This is what I ended up with

Street sweeper cam
102 TB by nw
102 FAST intake which was also ported by vengeance racing
BTR .650 springs
BTR Turion upgrade ffor rockers
Texas speed pushrods
New water pump with gasket
new thermostat
new 7 piece hose kit from samco
c5r timing chain
APR Cam bolts
Valve cover gasket
Head gaskets
head bolts
timing cover gasket
47lb bosch purple injectors ...then had to by the ev1 fuel injector adapters
holly fuel system to go with the 102 FAST intake. Because stock wont fit.
new oil and filter just for the break in period for the cam
Then to top it off...i had to get a tune

All that came from.....let me just slap a cam in lol

Georgies

So what cam did you finaly go with and hows it running?

FASTFATBOY

What power did it make?