[Z06] Z06 Carbon Fiber Valve Covers
#22
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
Re: Z06 Carbon Fiber Valve Covers (1fastdog)
I'll ask, but I know the red kevlar/carbon is very close to the Z06 red.
This is the black version being made for the Z16 Z06:
The Black CF Fuel Rail Covers would have the Corvette name on the cover integrated like the Halltech logo.
This is the black version being made for the Z16 Z06:
The Black CF Fuel Rail Covers would have the Corvette name on the cover integrated like the Halltech logo.
#24
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
Re: Z06 Carbon Fiber Valve Covers (GaryZ06)
I will know Monday. We will probably do it, since we are going to make a carbon fiber TRAP for the Z06 Z16 package, it would be fitting to have carbon fuel rail covers to compliment the rest of the system. Too much CF is ugly in my opinion, but having a few major components in this exotic material is just right.
It looks like we will go ahead with the covers, depending on the pricing. I promise to make the first 50 sets, with just enough profit to pay for the molds only. Dividing the mold cost by 50 will keep the overall cost very sweet for the first 50 sets.
Our Z16 CF TRAP system is ready for sale on our site. These are special order systems.
[Modified by Jim Hall, 9:14 PM 6/12/2003]
It looks like we will go ahead with the covers, depending on the pricing. I promise to make the first 50 sets, with just enough profit to pay for the molds only. Dividing the mold cost by 50 will keep the overall cost very sweet for the first 50 sets.
Our Z16 CF TRAP system is ready for sale on our site. These are special order systems.
[Modified by Jim Hall, 9:14 PM 6/12/2003]
#25
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
Re: Z06 Carbon Fiber Valve Covers (vettezosix)
Jim, count me in! As soon as I see some kind of pic, I will most definetely order the red kevlar carbon fiber covers! :cool: :steering:
Oh...one more thing...how will they look if I were to purchase a Red TRAP system...will they match??
Oh...one more thing...how will they look if I were to purchase a Red TRAP system...will they match??
#26
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
Re: Z06 Carbon Fiber Valve Covers (Fast Lane)
:confused: Are these fuel rail covers? If so then they would look great with my T1-C. :thumbs:
Here is the quality:
#28
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
Re: Z06 Carbon Fiber Valve Covers (GaryZ06)
We are trying to do something special for the Red/Kevlar units, to match the Commemorative Logo, but we need GM licensing to do it. To make just our logo in carbon fiber costs $20.00 per copy.
This stuff is very expensive.
This stuff is very expensive.
#29
Tunnel Ram Air Port
That is Stage 2, due to be released Monday. We are laying up the mold today and should have our first part out of the autoclave Monday morning.
It will be pure carbon fiber, five layer, with an entrance designed by our F1 airflow guru. He didn't like my design, so we paid him to make it right.
He is responsible for all the induction ports on many of the F1 race cars, and does everything on the flowbench.
This Tunnel Ram Air Port will still not be true ram air, since it will not have a capture box. Stage 3, will be Direct Ram Air, and will provide some additional benefits over Stage 2 in the quarter mile, with a capture box and minimal boost at high speed. It will be an upgrade to Stage 1 and Stage 2.
Z06 Style Screens will stop little animals from getting into the system. The best part is it will feature "Hot Swap". Halltech Tunnel Ram Air Port off, stock Corvette Plate or license plate back on in less than 30 seconds. Stage 2 is not legal for sale in states with a front license plate law.
Pictures next week.
We also have a surprise later today. Stay tuned.
[Modified by Jim Hall, 9:21 PM 6/12/2003]
It will be pure carbon fiber, five layer, with an entrance designed by our F1 airflow guru. He didn't like my design, so we paid him to make it right.
He is responsible for all the induction ports on many of the F1 race cars, and does everything on the flowbench.
This Tunnel Ram Air Port will still not be true ram air, since it will not have a capture box. Stage 3, will be Direct Ram Air, and will provide some additional benefits over Stage 2 in the quarter mile, with a capture box and minimal boost at high speed. It will be an upgrade to Stage 1 and Stage 2.
Z06 Style Screens will stop little animals from getting into the system. The best part is it will feature "Hot Swap". Halltech Tunnel Ram Air Port off, stock Corvette Plate or license plate back on in less than 30 seconds. Stage 2 is not legal for sale in states with a front license plate law.
Pictures next week.
We also have a surprise later today. Stay tuned.
[Modified by Jim Hall, 9:21 PM 6/12/2003]
I am very interested. Please email or IM me once it's available and you know the price. Thanks. :party:
#30
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
Re: Tunnel Ram Air Port (03 Z06)
We could probably do that, but too many variations drives up the cost. You could clean them with paint thinner, and spray paint them easily, but the screens match the stock Z06 screens.
Most folks will want to paint the piece to match their car. The shop could also paint the grill.
Most folks will want to paint the piece to match their car. The shop could also paint the grill.
#31
Burning Brakes
Re: Z06 Carbon Fiber Valve Covers (Jim Hall)
:confused: Are these fuel rail covers? If so then they would look great with my T1-C. :thumbs:
Yes, Black will be first.
Here is the quality:
Yes, Black will be first.
Here is the quality:
#32
Re: Tunnel Ram Air Port (Jim Hall)
Most folks will want to paint the piece to match their car. The shop could also paint the grill.
#33
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
Re: Tunnel Ram Air Port (03 Z06)
We will do the covers. The first batch will be in black carbon fiber with the Corvette Logo integrated into the carbon as shown above.
The Red Kevlar material will have to be ordered, but we should be able to get them started early July.
Hope to have a couple sets done for Nashville.
Ours will sport the 50th Anniversary Logo.
Pricing will be very fair. I will get pricing next week on the first 50 sets. After that we plan on making some profit. The forum gets the benefit of our endeavor for their help in the poll.
[Modified by Jim Hall, 7:52 PM 6/13/2003]
The Red Kevlar material will have to be ordered, but we should be able to get them started early July.
Hope to have a couple sets done for Nashville.
Ours will sport the 50th Anniversary Logo.
Pricing will be very fair. I will get pricing next week on the first 50 sets. After that we plan on making some profit. The forum gets the benefit of our endeavor for their help in the poll.
[Modified by Jim Hall, 7:52 PM 6/13/2003]
#36
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
Re: Tunnel Ram Air Port (thetorch)
I think we will probably have 30 red kevlar, and 20 black cf on the first run.
I should have pictures of the red kevlar Monday.
I should have pictures of the red kevlar Monday.
#38
Team Owner
Re: Tunnel Ram Air Port (Jim Hall)
Damn, it's the "how-many-times-can-I-post-my-sig-in-one-thread" competition. :jester :hat :p:
#39
Le Mans Master
Re: Z06 Carbon Fiber Valve Covers (Jim Hall)
C,mon Jim!!!!!!! Lets' see some pics from you!! This teasing is just not fair to us anxious Z guys!! I have read all these posts and you keep saying pics will be out later "today"....What day are you speaking of? ;0) And oh yes....I WANT one of the Red Kevlar covers for my Mill. Yellow Z.....
Zman
:cheers:
Zman
:cheers:
#40
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
Re: Z06 Carbon Fiber Valve Covers (Zeeman)
Our first Tunnel Port install is tomorrow. Going on our EB 2002 Z06.
I have started the molds for the carbon fiber beauty covers (fuel rail covers) and they should finish in two weeks, with our first prototype done in three.
I will have the red pics then. Those parts are being done for another customer.
Jim
I have started the molds for the carbon fiber beauty covers (fuel rail covers) and they should finish in two weeks, with our first prototype done in three.
I will have the red pics then. Those parts are being done for another customer.
Jim