Driver Window Problem.. help!!!!
Thread Starter
Instructor
Joined: Oct 2006
Posts: 138
Likes: 0
From: Miami FL
Driver Window Problem.. help!!!!
OK, so I was messing around today and changing some of my options like passive door locks and what not. Now my windows doesn't lower before I open the door. Worse yet, I can't close the door since the window is all the way up. Could that be a setting that I changed accidentally? I don't think so but I'm a new vette owner and haven't really figured everything out yet. I'm hoping I don't have to take it in for service but I may be wrong about that.
Any help would be greatly appreciated.
Thanks,
Frank
Any help would be greatly appreciated.
Thanks,
Frank
Team Owner
Joined: May 2004
Posts: 82,175
Likes: 1,319
From: McKinney TX
St. Jude Donor '21-'22-'23-'24
Raise the window and hold the up switch an extra 3 seconds. Release. Without lowering the window, hold the up switch again for 3 seconds. Release. Done.
This is called resetting of the window indexing and is in the owner's manual.
This is called resetting of the window indexing and is in the owner's manual.
Melting Slicks
Joined: Apr 2005
Posts: 3,216
Likes: 4
From: ---Phoenix, AZ --- Boiler Up, Hammer Down!
.
Instructor
Joined: Mar 2005
Posts: 191
Likes: 0
From: California
It happened to me once before. I brought the window down on the first click and held it for a few seconds and raised it on teh first click as well for another few seconds. This essentially resets the window module
Team Owner
Joined: May 2004
Posts: 82,175
Likes: 1,319
From: McKinney TX
St. Jude Donor '21-'22-'23-'24
Glad we could help.
It usually takes a battery outage to cause the window indexing to go out. Remember that if you ever have to disconnect your battery for more than a few seconds.
It usually takes a battery outage to cause the window indexing to go out. Remember that if you ever have to disconnect your battery for more than a few seconds.
